产品 / 切削工具 / 数控刀具&附件
编号：GRA1513010C
●产品描述：
Granlund Size 1 Insert Drills
Type B HSS Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：IND1409252K
●产品描述：
Indexa-Seiki Standard Pull Studs
BT-MAS 403
编号：IND1481390K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
Radial
Short, Upside down B3 Right Hand
编号：YML1220080N
●产品描述：
C22/32
To suit: Indexa Seiki multi-Pro Spot Drills & Chamfer Mills.
GUX
编号：GRA1514023A
●产品描述：
Granlund Size 1 Pilots
Type R Roller. c9.
When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1514098F
●产品描述：
Granlund Size 1 Pilots
Type RS Roller Tol. c9.
When working 'dry' type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：IND1443530K
●产品描述：
Indexa-Seiki Flatted Shank Adaptors
Allows existing Weldon Shank Side Lock Arbors to hold smaller shank cutters.
Flatted Shank Adaptor
编号：IDX1441132A
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC(a) Type
编号：IND4253618T
●产品描述：
T-Slot Clamping Kits
Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non alloy carbon steel. Heat treated to HRC 28-32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.
Contents: Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.
编号：AME1561529E
●产品描述：
Allied Maxcut Series 1 and 1.5 Inserts
For all dimensional specifications please refer to our catalogue.
GEN2 T-A HSS Super Cobalt AM200 Coated