产品 / 切削工具 / 数控刀具&附件
编号：GRA1513071A
●产品描述：
Granlund Size 1 Insert Drills
Type BH Carbide K20 Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：GRA1514153H
●产品描述：
Granlund Size 1 Toolholders
Type S with Rotating Depth Stop.
For further specifications please refer to our catalogue.
编号：IDX1442880K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 1.0 - 7.0.
(D)11.5mm x (L)18.0mm.
ER11
编号：AME1552160A
●产品描述：
Allied Maxcut Series Y Holders
Diameter range: 9.5 to 11.07mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank
编号：IDX1449122K
●产品描述：
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
ISO529 SZ1
编号：PNZ1442350K
●产品描述：
Pinzbohr Standard Arbors
A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.
ISO/DIN 2080
PNZ-144-2200K is the preferred Arbor for ?MICRO? Series Heads.
编号：IDX1449182K
●产品描述：
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
ISO529 SZ2
编号：IDX1443460K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 1.0-16.
(D)26mm x (L)35mm.
ER25
编号：AME1555025S
●产品描述：
Allied Maxcut Series 0 and 0.5 Holders
Diameter range: 12.98 to 17.65mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank
编号：PNZ1776060K
●产品描述：
Pinzbohr Micro Heads
Used in combination with indexable insert I.S.O. boring bars, these units can produce bores down to 5.5mm diameter and up to 34mm diameter. These MICRO heads fit the standard Pinzbohr arbors with connection diameters (SD') of 27, 32 or 42mm. Graduated precision dial readout to 0.01mm.
Note: If ground inserts used, please specify left hand for boring. Bores as small as 5.5mm diameter can be produced by using stepped bars.
For all dimensional specifications please refer to our catalogue.