产品 / 切削工具 / 数控刀具&附件
编号：AME1552400D
●产品描述：
Allied Maxcut Series 4 Holders
Diameter range: 46.99 to 65.28mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank
编号：IND1443526K
●产品描述：
Indexa-Seiki Flatted Shank Adaptors
Allows existing Weldon Shank Side Lock Arbors to hold smaller shank cutters.
Flatted Shank Adaptor
编号：GRA1514277J
●产品描述：
Granlund HSS Size 1 Countersinks
Type T. HSS. Tolerance x9 90.
Countersink T with a diameter 50mm and larger are made with a driving lip. These sizes should be used in the appropriate type M holder.
For further specifications please refer to our catalogue.
编号：IND1448630K
●产品描述：
Indexa-Seiki Tapping Chucks - Tension & Compression Type
With axial compensation. Suitable for use on boring machines and machining centres. To ISO/DIN 69871-A Taper Shank.
For all technical specifications please refer to our catalogue.
ISO/DIN 69871-A Taper Shank
编号：PNZ1775550K
●产品描述：
Pinzbohr Shank Reducers
For all dimensional specifications please refer to our catalogue.
编号：AME1561505E
●产品描述：
Allied Maxcut Series 1 and 1.5 Inserts
For all dimensional specifications please refer to our catalogue.
GEN2 T-A HSS Super Cobalt AM200 Coated
编号：IND1482720K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders
编号：AME1561589E
●产品描述：
Allied Maxcut Series 2 and 2.5 Inserts
For all dimensional specifications please refer to our catalogue.
Allied Maxcut GEN2 T-A HSS Super Cobalt AM200 Coated
编号：DIJ1232207G
●产品描述：
Dijet Mirror Ball Cutters
A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.
For all dimensional and technical specifications please refer to our catalogue.
Straight Neck
编号：AME1562085M
●产品描述：
Allied Maxcut Series 3 Inserts
For all dimensional specifications please refer to our catalogue.
GEN2 T-A HSS Super Cobalt AM200 Coated