产品 / 切削工具 / 数控刀具&附件
编号：IDX1443322K
●产品描述：
Indexa-Seiki ER Single-Angle Collets
Collet Dimensions:
Capacity 3.0-13.
(D)21mm x (L)31.5mm.
ER20
编号：IDX1440860K
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC Type
编号：GRA1514518A
●产品描述：
Granlund HSS Size 1 Counterbores
Type W. HSS. Tolerence P8.
Counterbores W with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：GRA1514019A
●产品描述：
Granlund Size 1 Pilots
Type R Roller. c9.
When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1512588W
●产品描述：
Granlund Size 1 Toolholders
Type A.
For further specifications please refer to our catalogue.
编号：GRA1513008A
●产品描述：
Granlund Size 1 Insert Drills
Type B HSS Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：AME1552180K
●产品描述：
Allied Maxcut Series Z Holders
Diameter range: 11.10 to 12.95mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank
编号：GRA1513322A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type H. Carbide K40 micrograin. Tolerance P8.
Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：DIJ1232059J
●产品描述：
Dijet Mirror Ball Cutters
A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.
For all dimensional and technical specifications please refer to our catalogue.
Straight Neck
编号：GRA1514294A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type WHV. For Carbide inserts. Tolerance plus/minus 0.1.
The WHV Rotatip counterbore should always be combined with type R or RS roller pilots. The shank of the holder must not be smaller than MT3.
For further specifications please refer to our catalogue.