产品 / 切削工具 / 数控刀具&附件
编号：IDX1440866K
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC Type
编号：IDX1443750K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.
ER32
编号：GRA1513319A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type H. Carbide K40 micrograin. Tolerance P8.
Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：AME1556220B
●产品描述：
Accuport 432 Port Contour Cutter Range
For all dimensional information please refer to our catalogue.
Port Standards: SAE J-1926/ISO11926-1 and MS16142.
编号：IND1481500K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
Radial
Short, Upside down B4 Left Hand
编号：ISC1394548C
●产品描述：
Iscar Helido Indexable Endmills and Facemills
The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish.
Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability.
The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO"s state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.
H490 - A new family of double-sided inserts with 4 helical cutting edges.
For further specification on this product please see refer to our catalogue page.
H490 F90AX...-09 Indexable Face Mills
Face Mills with double-sided inserts, diameter range 32-63mm.
编号：IDX1449340K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
ISO529 SZ2
编号：IDX1440786K
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC Type
编号：IDX1449344K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
ISO529 SZ2
编号：IDX1443860K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.
ER32