Allied Maxcut Series Y Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A C2 K20 Carbide AM200 Coated

Allied Maxcut Series 0 and 0.5 Holders

Diameter range: 12.98 to 17.65mm.

For all dimensional specifications please refer to our catalogue.

Flanged Straight Shank

Allied Maxcut Series 1 and 1.5 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A HSS Super Cobalt AM200 Coated

Allied Maxcut Series 1 and 1.5 Holders

Diameter range: 17.53 to 24.38mm.

For all dimensional specifications please refer to our catalogue.

Flanged Straight Shank

Allied Maxcut Indexable Drill Inserts

For a full range of Allied Maxcut Tool holders please refer to our catalogue.

For all technical and dimensional specifications please refer to our catalogue.

Inserts

Allied Maxcut Accuport 432 Port Contour Cutter Kits

In order to better align with the metric port specification ISO-6149, AMEC has updated some features of our metric AccuPort 432 tools. Since the AccuPort 432 Port Contour Cutter is the only indexable tool in the industry that can produce the drilled hole and the port form in one step, dimensions were changed to produce the most capable forms possible. By setting dimensions to the nominal values, the resulting port form will be well within acceptable tolerance requirements. Dimensions that were updated related primarily to the ID ridge diameter, pilot length, seal angle diameter, and spotface diameter.

Patent Pending System
? One operation Port Hole Drilling System.
? No pre-drilling necessary.
? Excellent tool life.
? Lower tool costs.
? Through body coolant
? Eliminates regrinding and resetting
? Reduced cost per port

AccuPort 432 Port Form Inserts provide
? Absolute repeatability.
? Excellent surface finish.
? Coated Inserts for longer tool life and increased productivity.
? Now available in C3 Carbide with AM200 for increased performance in cast iron applications.

AccuPort 432 AccuThread 856 J1926 Ferrous Material Kits
Available to provide all the tooling necessary to create the finished port.
Includes AccuPort 432 Body, all Inserts, and an AccuThread 856 Threadmill.

Accuport 432 Port Contour Cutter KIts

Allied Maxcut Series 2 and 2.5 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A K20 Carbide AM200 Coated

Allied Maxcut Structural Steel High Performance Drill Inserts

The Structural Steel Drilling system combines the GEN3SYS High Penetration Drilling System and the flexible T-A replaceable Insert Drill System. Linked to dedicated holders these two systems provide the most comprehensive solution available for fast and accurate drilling in all grades of structural steel used in RSJs and ?I? section beams, including thin wall sections and plate.
Compatible with: Kaltenbach/APS - FICEP - Peddinghaus - Voortman

Combined Drill ?Range
Metric: 14 to 40mm
Inch 0.5625" to 1.5625"

Minimum to Maximum Drill Depth Range
35mm to 224mm
Straight or helical flute options up to 7 x drill ?Choice of high performance substrates and coatings
Range of insert geometries
Outstanding tool life
Dedicated holder ? for increased rigidity
Through body coolant

T-A1 and 1.5 Series Holder Range

Allied Maxcut Coolant Accessories

Allied Maxcut rotary coolant accessories for use with AMC replaceable tip drills with through coolant.

Rotary Coolant Accessories

Allied Maxcut Series 2 and 2.5 Inserts

For all dimensional specifications please refer to our catalogue.

Allied Maxcut GEN2 T-A HSS Super Cobalt AM200 Coated