Carbide Grade AC2000 (P15 - P30)

Al2O3 Coated Grade
For general to rough cutting of steels.

NGU Chipbreaker

Application: medium materials.

Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

CCMT Indexable Turning Insert

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

SPKN

QP40 (ISO P40) Uncoated. For rough medium and finish milling of tough Steels and Stainless Steels including interrupted cutting.

1203

Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

CCMT Indexable Turning Insert

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Tang-Grip? TAG R/L-J/JS Parting & Grooving Inserts

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

Kennametal Indexable Turning Inserts

Grade Description: KC850 grade is equivalent to the following grades M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate makes this Kennametal CCMT insert suitable for general purpose machining of many work piece materials. With the advent of higher machine tool spindle speeds, today it finds its best application in heavy cutting of low, medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes grade KC850 ideally suited for difficult applications with interruptions.

CCMT Turning Insert

ISCAR?s new Single-Ended Insert for Parting With an Improved Clamping Method

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG N-C Parting & Grooving Inserts

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

ANMT

GH330 (ISO P20-P35 M25-M40) New PVD coated, general purpose wear-resistant grade, which can produce excellent surface finish and performs well on a wide range of work materials, including steels and stainless steels.

DNMG Indexable Turning Inserts

QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.