Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

DNMG Indexable Turning Insert

Chip Breaker: MA - Light roughing and general purpose cutting. Suitable for various cutting conditions and materials.
Depth of cut: .040 - .240
Feed Rate: .008 - .240

Mitsubishi Grooving & Parting Inserts

Grade Description: VP20RT A combination with a tough Miracle coated grade VP20RT makes it suitable for applications where inserts are vulnerable to fracturing.

GY Series Grooving & Parting Inserts

GY Inserts To Suit External Face and Internal Grooving Holders.

A full range of insert widths from 2mm to 6.35mm are available on request.

Mitsubishi Indexable Turning Inserts

Grade Description: NX2525 (P01-15 K01-15)
Cermet. Outstanding grade.
Provides the best in toughness and high wear resistance. has reliability and increased tool life at higher surface speeds in steels and cast irons.

CCMT Indexable Turning Insert

Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

CCMT Indexable Turning Insert

Mitsubishi Indexable Turning Inserts

grade description: UC5115 (K05-K25 P05-P25)
Grade consists of a very tough carbide substrate and Super-Smooth coating. Recommended for more difficult and unstable turning applications for grey, ductile, nodular cast iron and steel. Wet cutting is recommended for steel.

WNMG Indexable Turning Insert

Chip Breaker: GH - For roughing cutting. Controls chips from medium to high feed rates in carbon steel and alloy steels. Excellent in ductile cast iron.
Depth of cut: .040 - .240
Feed Rate: .015 - .032

Mitsubishi Indexable Milling Inserts

Grade Description: VP15TF (P15-P35/M15-M35/ K15-K30) PVD Miracle Coated Milling/Drilling Grade. Offers increased heat resistance and adhesion strength. For all Steels, Cast Irons and some Stainless Steel

SEMT Indexable Milling Inserts

Chipbreaker: JH - Medium to Heavy cutting Breaker
High accuracy molded type inserts. Strengthening of the cutter edge prevents chipping and thus fracturing.
1. Interrupted cutting.
2. Scaling.

Mitsubishi Indexable Milling Inserts

Grade Description: VP30RT (P30-P45/M30-M45) PVD Miracle Coated Milling Grade. Offers increased heat resistance and adhesion strength. For all Steels and Stainless Steel

JOMW Indexable Milling Insert

Chipbreaker: FT - Higher fracture resisyant flat inserts. For rough machining of scaled cast iron.

Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

WNMG Indexable Turning Insert

Mitsubishi Grooving & Parting Inserts

Grade Description: VP10RT is the first recommendation for turning difficult-to-cut materials with a good balance of wear and fracture resistance.

GY Series Grooving & Parting Inserts

GY Inserts To Suit External Face and Internal Grooving Holders.

A full range of insert widths from 2mm to 6.35mm are available on request.

Mitsubishi Indexable Turning Inserts

Grade Description: US735 (P20 - 40)
CVD Coated Grade. Specially designed for both interrupted and uninterrupted machining of materials that are subject to work hardening, such as stainless steels, where a sharper cutting edge produces more desired results

CNMG Indexable Turning Insert

Chip Breaker: MA - Light roughing and general purpose cutting. Suitable for various cutting conditions and materials.
Depth of cut: .040 - .240
Feed Rate: .008 - .240