产品 / 切削工具 / 数控刀片
编号：SNK1200901W
●产品描述：
CNMG
Suitable for External/Internal Toolholders
编号：SNK1207234H
●产品描述：
TNMG
Suitable for External/Internal Toolholders.
编号：SNK1208245G
●产品描述：
Sandvik CoroKey Indexable Turning Inserts
Sandvik CoroKey GC1005 grade description:
(HC)- S15 (S10-S25) M15 (M05-M20) PVD Coated. Hard fine grain substrate with good plastic deformation resistance and high wear resistance at high temperatures. Most suitable for Ni, Fe or Co-based heat resistant super alloys.
VBMT Turning Insert
Sandvik CoroKey MM chip breaker description: MM - Positive Inserts Sharp, positive edge and open chip breaker gives low cutting forces and soft cutting action.
编号：SNK1210128F
●产品描述：
Sandvik Threading Toolholders and Inserts
Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.
266 CoroThread ISO Metric External Left Hand Threading Insert
Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.
编号：SNK1200448R
●产品描述：
CCMT
Suitable for External/Internal Toolholders
编号：SNK1200972D
●产品描述：
Sandvik CoroKey Indexable Turning Inserts
Sandvik CoroKey GC1005 grade description:
(HC)- S15 (S10-S25) M15 (M05-M20) PVD Coated. Hard fine grain substrate with good plastic deformation resistance and high wear resistance at high temperatures. Most suitable for Ni, Fe or Co-based heat resistant super alloys.
CNMG Turning Insert
Sandvik CoroKey chipbreaker description: 23 - Negative inserts - Sharp geometry with low cutting forces suitable to machine slender shafts, thin-wall and also unstably clamped components. Positive geometry minimizes tendency for BUE.
编号：SNK1208277P
●产品描述：
Sandvik CoroKey Indexable Turning Inserts
Sandvik CoroKey GC4225 grade description:
(GC4225 ISO P25 (P10-P35) M15 (M05-M20) CVD Coated. A high performing all round grade. For medium to light roughing applications in Steel.
VBMT Turning Insert
Sandvik CoroKey chipbreaker description: PM - Positive Inserts - Positive geometry that gives soft cutting action and secure chip control in the whole application area. To be used in vibration sensitive operations.
编号：SNK1201050A
●产品描述：
CNMG
Suitable for External/Internal Toolholders
编号：SNK1210827E
●产品描述：
Sandvik Threading Toolholders and Inserts
Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.
266 CoroThread UN External Right Hand Threading Insert
Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.
编号：SNK1210692A
●产品描述：
Sandvik Threading Toolholders and Inserts
Sandvik's 266 CoroThread toolholders and inserts provide a high level of stability for threading applications in demanding industries, where precision is paramount.
266 CoroThread ISO Metric External Right Hand Threading Insert
Grade description for GC1125:
New PVD-TiAIN-based coating and substrate combine to improve wear resistance and security for threading, providing the option of running at higher cutting speeds or for a longer time in cut.