SPKN

QM3535 (P20 - P35) PVD TiAIN Coated for milling of steel.
Comprehensive grade which covers wide application range due to substrate providing optimal wear resistance and toughness.

1203

CCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

DNMG Indexable Turning Inserts

QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

DCMT

QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Yamaloy® Inserts

QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

Partial Profiles

External Right Hand

WNMG

Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Aerospace Turning Inserts

QX8010 (P10/K10/M10/S30) Coated. An excellent general purpose grade for medium roughing on steels, stainless and cast irons.
Chipbreaker Description: Nsm - Medium/heavy depth of cut at higher feeds.

Yamaloy® Indexable Carbide Inserts

Grade description: QZ830 (ISO P25-P40) Tough coated grade for Steels, suitable for interrupted cutting such as cross holes.

WCMX Carbide Insert

Suitable for Indexable Drills

SEHW

QP25C (ISO P10-P35) CVD Coated. Milling grade for Steels and some Stainless Steels.

1204

To suit: Indexa-Seiki "4 Square" Milling.

Yamaloy Threading Toolholders & Inserts

This DER 2020 K16 Metric type-B toolholder from Yamaloy is supplied with five 16ER ISO QMA grade Yamaloy threading inserts.

Grade Description: QMA (P20-P40, K20-K30) Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

For the full list of the set contents and technical specifications please refer to our catalogue.

DER 2020 K16 Metric B-Type Toolholder & Inserts Threading Kit

Yamaloy threading kit contents:
1x 16ER B 1.00 ISO insert,
1x 16ER B 1.25 ISO insert,
1x 16ER B 1.50 ISO insert,
1x 16ER B 1.75 ISO insert,
1x 16ER B 2.00 ISO insert,
1x DER 2020 K16 toolholder,
1x T15 torx key.
Supplied in plastic tube.

VNMG Indexable Turning Inserts

QX530 (ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.



Suitable for External Toolholders