SEHT

QP25C (ISO P10-P35) CVD Coated. Milling grade for Steels and some Stainless Steels.

1204

To suit: Indexa-Seiki '4 Square' Milling & Hi-Shear Cutters.

TNMG Indexable Turning Inserts

QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.



Suitable for Internal/External Toolholders

VCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.



Suitable for External Toolholders

Yamaloy® Inserts

QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

Whitworth

External Right Hand

VNMG

Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Aerospace Turning Inserts

QX8010 (P10/K10/M10/S30) Coated. An excellent general purpose grade for medium roughing on steels, stainless and cast irons.
Chipbreaker Description: Nss - Light to medium depth of cut at mid range feeds.

VCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.



Suitable for External Toolholders

DCGT Indexable Turning Inserts

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

SEKN

QM3535 (P20 - P35)PVD TiAIN Coated for milling of steel.
Comprehensive grade which covers wide application range due to substrate providing optimal wear resistance and toughness.

1203

To suit: Indexa Seiki Face hog milling Cutter. Hitachi 45° Face Mill.

CCGT

QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

VCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.



Suitable for External Toolholders