产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号:KEN2873040K
●产品描述:
Kennedy® Router Cutters
With Pilot. To pierce and cut out apertures in laminate worktops. The base of the cutter acts as a guide follower.
Single Flute Panel Bits
编号:KEN2882290K
●产品描述:
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Long Series
Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.
编号:KEN2872540K
●产品描述:
Kennedy® Router Cutters
For veining work and decor of panels. Larger sizes suitable for chamfering and deep angled groove work.
Two Flute V-Grooving Bits
编号:TRE2877082T
●产品描述:
Trend HSS Snappy Drill Countersinks - SNAP/CS
Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.
Drill Diameter; 9/64" (No.12 Screw)
编号:KEN2881520K
●产品描述:
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.
编号:KEN2892030K
●产品描述:
Kennedy® Power Tool Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
Kango Style Chisels
For Kango: 900K, 928, 950K, 978, 1400. Hitachi: DH38YD, DH50SA, H55SA. Makita: HM1200K, HR3850K. 21mm Hex Shank with Single Flat & Round Tang.
编号:RTB2886120B
●产品描述:
Rotabroach SRC Standard Cutters
Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.
编号:KEN2874140K
●产品描述:
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号:KEN2872260K
●产品描述:
Kennedy® Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号:KEN2881290K
●产品描述:
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.