产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2874920K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：RTB2886140D
●产品描述：
Rotabroach SRC Standard Cutters
Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.
编号：KEN2891800K
●产品描述：
Kennedy® Power Tool Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
Kango Style Chisels
For Kango: 501, 627, 628, 637, 638, 430 - Type 750 Shanks. 19mm Hex Shank with Single Flat and Round Tang.
编号：KEN2959900K
●产品描述：
Kennedy® 6 Piece Industrial Wire Brush Set
All supplied in clear bag with header.
Industrial Wire Brush Set (5 Piece)
Contents: (1 off each):
Flat end de-carbonising brushes 12 x 20, 17 x 22 & 24 x 25.
Pointed end de-carbonising brushes 12 x 20, 17 x 22 & 24 x 25.
编号：KEN2802110K
●产品描述：
Kennedy® Flexible Backing Pads
Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.
编号：KEN2872460K
●产品描述：
Kennedy® Router Cutters
For veining work and decor of panels. Larger sizes suitable for chamfering and deep angled groove work.
Two Flute V-Grooving Bits
编号：KEN2892400K
●产品描述：
Air Tool Chisels with 0.401" Shank
For All Brands of Portable Air Chisels including CP, Desoutter, Kobe, Toku and YK.
编号：KEN2892060K
●产品描述：
Bosch Style Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
For Bosch: USH27, USH28, 11304, 11308, 12314. 29mm Hex Shank with Single Flat.
编号：TRE2873199M
●产品描述：
Trend Router Cutters
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
Two Flute Flush Trimming Bits
1/4" and 1/2" Shanks
编号：KEN2881360K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Short Series
Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.