产品 / 动力工具 & 磨料磨具 / 电动工具附件
编号：KEN2882170K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Long Series
Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.
编号：KEN2882380K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Long Series
Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.
编号：KEN2882160K
●产品描述：
Kennedy® M2 Multi-Tooth Milling Cutters
Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.
Long Series
Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.
编号：KEN2874580K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2804020K
●产品描述：
Kennedy® Tie Cord Bonnet Support Pads
High quality 23mm foam pads with rigid back plates. For use with all tie cord bonnets. Bonnets supplied separately. Max 2500rpm. (125mm and 150mm pads are dual purpose - also for use with Velcro bonnets or foams).
Bonnet diameters available: 125mm, 150mm, 180mm, and 200/225mm.
Thread sizes: M14 x 2 and 5/8" UNC.
编号：KEN2875420K
●产品描述：
Kennedy® Router Cutters
General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
Two Flute Straight Plunging Bits
编号：KEN2872180K
●产品描述：
Kennedy® Router Cutters
To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.
Two Flute Rounding Over Bits
编号：KEN2891330K
●产品描述：
Kennedy® Power Tool Chisels
Suitable for air and electric hammers and breakers, for all classes of work.
Kango Style Chisels
For Kango: 501, 627, 628, 637, 638, 430 - Type 750 Shanks. 19mm Hex Shank with Single Flat and Round Tang.
编号：KEN2873180K
●产品描述：
Kennedy® Router Cutters
Cutter for deep mortising and grooving. Staggered cutting edges give good chip clearance enhancing quality of cut.
Two Flute Staggered Tooth Bits
编号：KEN2802590K
●产品描述：
Kennedy® Pin Spanners for Angle Grinders
Several types available. Weight 110g.
Pin Spanner
To suit Makita 125mm.
Pitch: 28.
Pin diameter: 3.4.