Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

240ltr 2-Wheeled Poly Bin Spill Kits

Contents:
200 x pads.
12 x socks.
10 x pillows.
18 x disposal bags.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Maintenance Pad

Pack quantity: 20.
Size: 50 x 40cm.
Absorbs: 1.1 litres.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Maintenance/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Light Duty
Size: 50 x 40cm
Pack Qty: 50
Absorbs (ltrs): 0.5

Solent? Absorbent Pillows

These absorbent pillows are particularly useful for coping with persistent leaks that require more than the absorbent capacity offered by pads. Can be left in place under machinery.
Dimensions: 38 x 23cm.

Solent? Oil Selective & Marine Absorbents

Oil selective absorbent products are capable of removing and containing oil based liquids from water. The products will float on water and only absorb the oil.Applications: For use on lakes, rivers, outfalls, ditches or separation pits, oil bunds, or where wet weather recovery of oil is anticipated.Benefits: Easy to deploy and recover, highly absorbent, will not absorb water. Floats even when oil saturated, non-toxic, non-reactive and fast-acting.Typical Liquids: Vegetable and mineral oils and all hydrocarbon derivatives.

35ltr Cube Bag Spill Kits

Contain a range of absorbent products and disposal bags for dealing effectively and quickly with spills.
Contents: Printed cube bag. 2 x socks (80mm x 3M). 15 x pads (double weight). 1 x disposal bag and tie. 1 x instruction sheet. Kit capability: 35 litres.

Solent? Audit Spill Cover

Spill kit audit covers are yellow, weatherproof PVC covers with elasticated cord to allow fitting over the top of a 2-wheeled wheelie bin spill kit. A4 sized clear pouch for inserting audit record sheet. Tamperproof tape fitted on the container and cover indicates whether any of the contents have been used. Depleted spill kits are classified as ISO14001 non-conformity. Available in 3 types: 120 litres, 240 litres and 360 litres.

Solent? Absorbent Drum Top Covers

Cut to fit exactly on the top of a 205 litre drum, these covers help keep a dispensing area free of leaks and drips. Each cover will absorb up to 1 litre of most industrial fluids.
Dimensions: 56cm diameter.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

50ltr Vinyl Holdall Spill Kit

Contents:
35 x pads.
3 x socks.
3 x pillows.
5 x disposal bags.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

25ltr Small Poly Bin Spill Kit

Contents:
17 x pads.
1 x sock.
2 x pillows.
4 x disposal bags.