Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

240ltr 2-Wheeled Poly Bin Spill Kits

Contents:
200 x pads.
12 x socks.
10 x pillows.
18 x disposal bags.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

15ltr Clip-Closed Carrier Spill Kit

Contents:
10 x pads.
1 x sock.
1 x disposal bag.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Chemical Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.

Solent? Audit Spill Cover

Spill kit audit covers are yellow, weatherproof PVC covers with elasticated cord to allow fitting over the top of a 2-wheeled wheelie bin spill kit. A4 sized clear pouch for inserting audit record sheet. Tamperproof tape fitted on the container and cover indicates whether any of the contents have been used. Depleted spill kits are classified as ISO14001 non-conformity. Available in 3 types: 120 litres, 240 litres and 360 litres.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC616P

L x W (cm): 61 x 61 Polyurethane

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

15ltr Clip-Closed Carrier Spill Kit

Contents:
10 x pads.
1 x sock.
1 x disposal bag.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Oil Only Pad

Pack quantity: 20.
Size: 50 x 40cm.
Absorbs: 1.1 litres.

Solent? 'Natural' Absorbents

Rather than relying on a non-renewable resource such as polypropylene for their construction, this all-new range of absorbent pads, rolls and socks from Solent Plus utilises raw materials that are constituted 80% cellulose fibre in their manufacture. Cellulose fibres are one of the most widely available sustainable resources and have a low-dependence on fossil fuels. All of the products are available in either maintenance or oil-only grades, and represent a viable, cost-effective alternative to traditional melt-blown absorbents. The performance is equal to, if not better in some cases than conventional absorbents. Of particular note here is the oil pad, which has a class-beating absorbency rating of up to 1.4 litres per pad.

?Natural? Pads

?Maintenance? will absorb 0.8ltrs. ?Oil only? will absorb 1.4ltrs.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

20ltr Vinyl Holdall Spill Kit

Contents:
15 x pads.
2 x socks.
3 x disposal bags.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

25ltr Small Poly Bin Spill Kit

Contents:
17 x pads.
1 x sock.
2 x pillows.
4 x disposal bags.