Loctite Hysol 3475 A&B - Metal Set A1 - Slow Cure

Loctite Hysol 3475 A&B is an aluminium filled, 2K-Epoxy adhesive, for repairing and rebuidling worn metal parts. Ideal for repairing castings and cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 45 min.
? Fixture time: 180 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 70 N/mm
? Operating temperature: up to 120C

Loctite Hysol 3473 A&B - Metal Set S3 - Fast Cure

Loctite Hysol 3473 A&B is a steel filled, 2K-Epoxy adhesive, for emergency repairing and rebuilding worn metal parts. Ideal for repairing pipes and castings as well as cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 6 min.
? Fixture time: 15 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 60 N/mm
? Operating temperature: up to 120C

Loctite 3463 Metal-filled 2-Part Epoxy

"2K Epoxy" - Sets in 10 minutes. Steel filled kneadable Stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted. Ideal for emergency sealing of leaks in pipes and tanks, smoothing over rough finish welds and repairing small cracks in castings

Working life: 3 min.
Fixture time: 10 min.
Shear strength (GBMS): >6 N/mm²
Compressive strength: 82,7 N/mm²
Service temperature range: -30 °C to +120 °C

Metal Set Syringe

A two-part filled epoxy resin supplied in a small hand held dual syringe giving accurate dispensing for small scale repairs.

660 Quickmetal

Ideal for keeping machinery running by repairing worn coaxial parts without the need for total dismantling and re-machining. Allows the re-use of worn bearing seats, key ways, splines, tapes or retaining shims. (Use with Activator 7240 or 7649)