Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Devcon 50ml Devweld 530

Rapid curing multi-purpose toughened structural methacrylate adhesive which produces superior load bearing bonds to engineered plastics, metals, ceramics and many other difficult substrates. Minimal surface preparation. Resistant to weathering, humidity and wide variations in temperature.

Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Devcon 2-Ton Clear Epoxy Adhesive

Produces strong, rigid bonds on metal, ceramics, wood, concrete, glass or combinations. Fills poorly mated surfaces and cures without shrinking with good impact strength.

Flexane Liquid

Good for abrasion/tear resistant linings. Protects against vibration, shock & wear. Cost-efficient moulds (self-levelling).



Flexane 94: Shore 94, relatively rigid. Max Operating Temperature: 82C. Pot Life: 10 minutes. Mix Ratio: 2.19:1.

Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Floor Patch

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and heat up to 120C.

Aluminium Putty (F)

Machinable. Resistant to rust, CFC?s and other chemicals. Bonds to other metals and thermoset plastics. Max operating temperature: 121C. Pot life: 60 minutes. Mix ratio: 9.0:1. Available in 500gm or 1kg tubs.

Size: 500gm

Tooling & Production Epoxies

Devcon high performance tooling and production epoxies provide a fast and economical method of manufacturing moulds, patterns and tools. They may be machined, drilled and tapping using conventional machine tools, while their properties allow accurate and detailed reproduction when cast over existing models.

Plastic Steel Liquid

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Magic Bond

A two colour stick which seals leaks and repairs gouges in steel, aluminium, wood, fibreglass, concrete and ceramics. Works on wet surfaces, can be painted, sanded, machined, tapped or drilled and is ready for use in 1 hour.
Max Operating Temperature: 121C.
Pot life: 10 mins