High Speed Emergency Repairs Zip PatchTM

Adhesive impregnated patch. For repairs to pipes, tanks, containers, etc. Hardens at room temperature to form a tough waterproof finish in minutes. Bonds to most common substrates. Max Operating Temperature: 93C.

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Stainless Steel Putty (ST)

Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non ferrous metals and concrete. FDA approved. Max Operating Temperature: 121C.Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Floor Patch

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and heat up to 120C.

Aluminium Putty (F)

Machinable. Resistant to rust, CFC?s and other chemicals. Bonds to other metals and thermoset plastics. Max operating temperature: 121C. Pot life: 60 minutes. Mix ratio: 9.0:1. Available in 500gm or 1kg tubs.

Size: 500gm

Wet Surface Repair Putty (UW)

High-exothermic, non-rusting epoxy putty for use in wet environments and underwater. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Max Operating Temperature: 93C. Pot Life: 45 minutes. Mix Ratio: 1.40:1.

Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Devcon 50ml Devweld 530

Rapid curing multi-purpose toughened structural methacrylate adhesive which produces superior load bearing bonds to engineered plastics, metals, ceramics and many other difficult substrates. Minimal surface preparation. Resistant to weathering, humidity and wide variations in temperature.