Wire Scratch Brushes

Stainless steel wire scratch brushes are used on stainless steel and aluminum fabricated products - predominantly in stainless steel welding processes where the use of an ordinary wire scratch brush would create the risk of contamination of the weld. Hardwood handle.

Stainless Steel Bristles

Black Rubber Tyre Steel Centre Wheel with Roller Bearing

For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with "cushioned" tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 60C.

Replacement Wheel Only. (No Top Plate Supplied)

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

Assorted Plasters





This range of plasters are adhesive and individually wrapped. Boxes of 100. Available as blue detectable, fabric or waterproof.

Avon™ Hazard/Lane Tape

Avon™ lane marking and hazard tapes are high quality PVC self-adhesive tapes with an aggressive adhesive and excellent resistance to abrasion, they are available as plain solid colours or as diagonal two colour striped hazard tapes.

They are ideal for marking out gangways, factory and warehouse floors and hazardous zones and for locating fire-fighting equipment, placing around prohibited areas and indicating highly flammable areas.

Size: 50mmx33M (AVN-964-4230C 75mmx33M)

Avon™ lane marking and hazard tapes are available in the following colours:

Yellow solid colour.
White solid colour.
Green solid colour.
Blue solid colour.
Black solid colour.
Red solid colour.
Green/White striped.
Red/White striped.
Black/Yellow striped.


For the full range of Avon™ tapes and tape dispensers please refer to our catalogue.

Self-Adhesive Barrier/Lane and Hazard Marking Tape

Fluted Angle Brackets - Galvanised

A multi-purpose product often used by the plumbing and associated trades. Bright zinc plated steel.

HT290 LED Head Torch

The HT290 is a professional product offering high
performance and long running. Using a XP-G LED, deep dish reflector and thermal control technology, the HT260 is designed for optimum light output over a long distance. Using a multimode switch set to the side, allowing the user ease
of access (even with gloves) between the 4 light mode options
(high,med,low,SOS). The head is also compatible with larger battery belt packs which are suitable for when longer running times are required.
High-vis reflective safety strips.
Water, shock and drop resistant.
Detachable battery pack (for use with belt pack).
Battery control technology (for extended runtime).
Direct ‘plug in’ charge.
Battery attachment case (bike/belt).
Battery belt packs.
Nylon pouch.
Extension cord.
Helmet clips.
Beam distance: 280m.
Running time: 3h30/15h/20h/23h.
Charge time: 6h.
Battery type: 4.8V 2200 mAH Ni-MH.
Head size: 96 x 67 x 78mm.
Power pack size: 31 x 76 x 42mm.
Weight 352kg.

Shotblast Rubber Sheets

A cost-effective, abrasion-resistant rubber. 62 shore A hardness. Tensile strength at break: 10Mpa. Elongation at break: 350%

Mobile Scissor Lift Tables

The light duty 150kg scissor tables are light, portable, highly manoeuvrable & easy to use. They have been designed, developed and built to give long service with minimum maintenance required. Available in super light weight Aluminium or Steel. Lifts to a height of 780mm. Folds flat for easy transportation & storage. Manual hydraulic operation. Fitted with overload valve & slow lowering valve to control the lowering speed. Fitted with rubber non-marking tyres to prevent damage to floors. Quality British design and manufacture.

Manual Operation

Hazardous Liquid Dispensing and Storage

These pump plunger cans are the safest way of moistening wipes with flammable liquids. You simply place the cloth onto the spring-loaded tray and depress it to pump liquid onto the cloth the NEW improved smart pump mechanism manufactured from chemically resistant Ryton and brass will pump down to the last 6mm of liquid, requiring less refills and therefore less exposure to potential spillage. With each action of the pump more liquid is bought to the surface. Saturation is increased by 50%. The perforated tray acts as flame arrestor so in the event of a fire flame will not reach the flammable liquid. Excess liquid drains back into can, reducing product usage through less wastage.

Supplied with a 10 year limited guarantee.

Manufactured in the USA.

FM approved.

Black Top Plunger Can