Grey Rubber Tyre, Plastic Centre Wheel with Plain Bore

Swivel Type with Bolt Hole

Grey Rubber Tyre, Plastic Centre Wheel with Plain Bore

uitable for use on hard floors (cement, tiles, etc). Non marking rubber tyre. Quiet running with "cushioned" tyre Suitable for humid environments where medium harsh chemicals may be present. Not recommended for use with organic solvents, chlorinated substances, hydrocarbons or mineral oils. Operating temperature range -20C to 60C.

Strung Tags

Avon strung tags are strong, high quality tags ideal for a wide range of uses.
Made from 100% recycled board.
Colour buff.
Reinforced with washers for added strength.
Supplied in boxes of 1000.

Available in a range of sizes.

Strung Tags

Mending Plates

With offset screw holes to avoid wood splitting. Bright zinc plated steel.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Ultralift TP Lifting Magnet

Manually operated permanent lifting magnet specifically designed for lifting thin plate and removing single sheets from a stack. Operating handle works like a car handbrake. A button on the end operates a safety catch which prevents accidental switching while a load is being held. Simply attach the Ultralift TP to the hook of your crane or hoist and you?re ready to go. Permanent magnets and manual switching mean no operating costs. A job that takes two men with hooks, chains or slings can be done with one hand using the Ultralift TP. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it?s lifted. Loads can be stored and accessed more efficiently as you only need access to the load?s top face to attach the Ultralift TP.

TP150

Specifications;
Material Thickness - 5mm;
SWL: 75kg, Maximum Length: 1500mm.
Material Thickness - 6mm;
SWL: 100kg, Maximum Length: 1500mm.
Material Thickness - 8mm;
SWL: 150kg, Maximum Length: 1500mm.
Material Thickness - 10mm;
SWL: 200kg, Maximum Length: 1500mm.

First aid kits compliant with BSi8599

The BS8599 standard replaces the BHTA-HSE and will be effective from 30th June 2011, with a transitional introduction period until 31st December 2011. The BS8599 kits have a more comprehensive content compared to BHTA-HSE kits.

All establishments will need at least one first aid box. Large factories/offices will need first aid kits in every self contained working area and it is recommended that companies with more than 50 employees should consider the provision of more than one kit.

Remember that first aid should always be nearby and it is advisable to have one First Aid Kit of the appropriate size for each enclosed area.

Medium

For 25-100 employees in a Low Hazard environment or 5-25 employees in a High Hazard environment. 270x220x90mm
Contents:
First Aid Guidance leaflet - 1
Medium Sterile Dressing, 12cm x 12cm - 6
Large Sterile Dressing, 18cm x 18cm - 2
Triangular Bandage - 3
Sterile Finger Bandage - 3
No. 16 Sterile Eye Pad - 3
Adhesive Plasters Assorted Sizes - 60
Burn Dressing, 10cm x 10cm - 2
Alcohol-free Cleansing Wipes - 30
Safety Pins - 12
Adhesive Tape, 2.5cm x 10cm - 1
Disposable Nitrile Gloves - 9pr
Resusciade Face Shield - 1
Emergency Foil Blanket - 2
Heavy Duty Clothing Shears - 1
Conforming Bandage, 7.5cm x 4m - 2

COBAGRiP Sheet

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Ideal solutions for slip hazards such as spilt liquids or ice.
Available in 3 colours to meet all DDA requirements. Suitable for use with forklift traffic. Simply bond or screw to the existing floor surface.
Product height: 3mm GRP base overall 5mm.

Nylon Wheel Only

Suitable for use on compact floors (cement, tiles, etc). Particularly recommended for the food processing industry. Not recommended for use where mineral or organic acids are present. Operating temperature range -10C to 60C.

Replacment Wheel Only (No Top Plate Supplied)

Alkaline Batteries

New technology batteries giving 20% longer life. Anti-leakage and anti-short circuit system.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.