SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

Magnetic Letters and Numbers

Magnetic tiles supplied on sheets as a combination of mixed alpha or numeric digits. Two tile heights, either 43mm with a 39mm high digit or 23mm with a 17mm high digit. Available with black digits on a white or yellow background. Allows for fast and easy labelling on any steel surface.

Bratt?s Timber Step Ladders

Heavy construction for industrial use. Manufactured from Douglas fir, morticed, tenoned, glued and wedged. Hinged to the back board and bolted through the stiles for extra strength. Treads at 250mm rise, pinned with ring shank nails and fitted with check blocks at intervals to prevent sideways movement. Tie rod are fitted at not more than 4 treads apart. All with varnished finish and all metal fittings are rust proofed. Manufactured to BS1129 Class 1 and Kitemarked.

Swingback Timber Platform Step Ladder - HPS

Light Weight Steps

Utilising 19mm steel tube for a lighter step the 2 - 4 tread models use spring-loaded self-weight retractable castors; step onto the step and the rubber feet impact on the floor to immobilise the step to give maximum stability. The 5 - 6 models are fitted with a central braking system and fixed rear axle. These steps are ideally suited to light duty warehouse or office environments. Supplied in pacific blue as standard, signal red available if required. Price includes delivery (UK mainland).

Corner Braces - Countersunk Inside & Outside

Provide essential rigidity to the assemblies and reinforce right angle corner joints. Bright zinc plated steel.

Floor Identification Markers

*When ordering individual characters please complete the order code by adding the character required to the end of the (incomplete) code given below eg. for the letter A please order BVW-966 -1200A



Designed to identify, aisle, bay or other warehouse floor areas. Each marker is 190mm diameter. Printed with a bold black numeric digit or letter of your choice on a yellow background. They are suitable for use on dry, clean, flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions.
Available Letters A to Z.

High Temperature Phenolic Resin Wheel With Plain Bore

Suitable for use on hard floors (cement, tiles, etc). Suitable for humid environments where medium harsh chemicals may be present. Not recommended on uneven our rough surfaces. Operating temperature range -30C to 300C.

Swivel Type with Top Plate

Zinc Finish

Matlock Kick Plates

Available in aluminium or satin stainless steel finishes.
Dimensions:
10 widths available: 676, 701, 712, 737, 776, 788, 801, 813, 876 and 901mm.
Height: 150mm.

Magnetic Easy-Wipe Racking Strip

Adheres to any steel racking. Cut to any length to suit. Write on - wipe off. Yellow, white, blue, green or red. State colour required. 10, 15, 25, 40, 60, 80 and 100mm width strips also available on request.