Matlock Kick Plates

Available in aluminium or satin stainless steel finishes.
Dimensions:
10 widths available: 676, 701, 712, 737, 776, 788, 801, 813, 876 and 901mm.
Height: 150mm.

Identification Self Adhesive Numbers & Letters

Perfect for factories, warehouses, showrooms, computer rooms and offices etc. Vinyl labelling which is easily applied and can be cleanly removed. 8 sizes in black on yellow with identical digits on each card. Colours are only available in sizes F1, F2 and F3. Cards can be supplied in packs of A - Z and 0 - 9 or as mixed numbers and letters. Cards of directional arrows are available in sizes F3, F4, F5,and F6.

Please refer to the Cromwell Industrial Supplies Catalogue for more details.

Black Rubber Tyre Steel Centre Wheel with Roller Bearing

For smooth running with heavier loads. Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with ‘cushioned’ tyre. Not recommended for use where mineral or organic acids are present.
Operating temperature range -20°C to +60°C.

Swivel-Type with Bolt Hole & Brake

Squire Old English Padlock

4-lever padlock with forged steel shackles, cold rolled steel cases. Brass bolt levers and keyhole covers. Suitable for outdoor security applications.

Specifications:
Body width: 64mm.
Shackle dia x clearance: 10mm x 21mm.

SiteSafe® General Construction Signs

If you don't know which signs you need - ensure your site is safe and legal with our FREE step by step guide. Call your local branch for a copy.

PROCEED WITH CAUTION

Ensure safe site navigation with this range of durable 1mm rigid plastic construction signs.

Graphic Floor Signs and Identification Markers

A range of hi-visibility graphic floor signs. Each sign is 430mm in diameter and designed to highlight warnings or special requirements required by industry.

Each marker is printed onto the underside of a clear PVC film that has been selected to withstand the traffic in a modern warehouse and then laminated on the back surface with an aggressive permanent adhesive. They are suitable for use on dry, clean flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions. Although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is needed.

Door Controls

This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.

BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) - Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) - Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) - Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) - Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) - Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) - Corrosion-resistance:
?0? - indicates no defined corrosion-resistance,
?1? - indicates mild corrosion-resistance,
?2? - indicates a moderate level of corrosion-resistance,
?3? - indicates high corrosion-resistance,
?4? - indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.

An example of the grading for a 1559 closer unit would be as follows:

3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6)

Electro-Magnetic Fire Stay - Silver Finish

Silver finish. Electro-magnetic holds open fire doors but releases in the event of fire. Closing force size 4 (EN1155). Maximum door width 950 - 1100mm. Suitable for doors 60 - 80kg. Adjustable check action. Adjustable latch action. Hold open from 70 - 180. Two cover options available for this unit.

Matlock Tarpaulins

Standard-Duty: 120gsm with standard corners. Green. For industry, construction, agriculture, marine, domestic and recreation. Washable, shrinkproof, rotproof, tear-resistant and UV stabilised to prevent fading.Ideal ground cover for camping, hunting or fishing. Double laminated polyethylene weave with rope lined hems which are heat sealed with aluminium eyelets at 1 metre intervals. Also available in 160gsm heavy-duty.

Matlock Tarpaulins - Standard-Duty

Bratts Ladders and Access Equipment

Designed originally for National Energy Boards to work in domestic premises. The StepUp can be used anywhere you need a strong, safe platform that enables the user to maintain 3 points of contact.

Manufactured from BS compliant raw materials, with heavy duty non-conductive glassfibre frame, recycled plastic non slip platform, safety handrail, locking hinges and folds flat for storage. Will easily fit into the boot of a car or back of a small van for transportation.

We can also make the StepUp to your own specification.

Portable Glass Fibre Work Platform

Platform Height: 500mm.
Platform Size: 600mm x 460 mm
Size Closed: 650mm x 500mm x 200mm.

Safe Step? Tape

Self adhesive tapes and treads that provide a quick, effective, and economical solution to the problem of slippery surfaces. Whether indoors or outdoors, on steps, walkways, machinery or in wet areas, Safe Step? tapes and treads provide a safe and durable anti-slip surface. A silicon carbide surface makes them durable and they have a flexible carrier tape which ensures minimal surface cracking. Resistant to water, motor oil, detergents, solvents, and UV light.

Standard Treads - Black

As Standard Tapes and particularly suited to stairs and walkways.