Graphic Floor Signs and Identification Markers

A range of hi-visibility graphic floor signs. Each sign is 430mm in diameter and designed to highlight warnings or special requirements required by industry.

Each marker is printed onto the underside of a clear PVC film that has been selected to withstand the traffic in a modern warehouse and then laminated on the back surface with an aggressive permanent adhesive. They are suitable for use on dry, clean flat sealed surfaces and have been independently tested for slip resistance, performing well in all conditions. Although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is needed.

Energizer Rechargeable NiMH Batteries C (Pk-2)

Powers thousands of pictures in digital cameras. Can be recharged hundreds of times. The economical solution for performance in high-tech devices

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

M228 EPDM Rubber Sheets

EPDM RUBBER is ideal for outdoor application because of its excellent resistance to ozone, oxidants and severe weather conditions. 67 shore A hardness. Tensile strength at break: 5Mpa. Elongation at break: 300%

Security Hasps

Manufactured from hardened steel with a duplex nickel plated anti-corrosive finish. The hinge pins, fixings and assembly are concealed with a folded edge for tamper protection. Supplied with fixing screws.

Single hinged

For use on standard duty and domestic applications.

Aluminium Ladders

A high quality box section ladder with 'D' rungs. Available in triple sectionmodels for ease of handling and storage. Manufactured to BSEN131 and Kitemarked.

Matlock Round Bar Pull Handles

Aluminium finish. 19 and 22mm DDA roundbar aluminium pull handles, 425mm length with a clearance exceeding 45mm from pull grip to door face. (Bolt through version illustrated). DDA & BS8300 compliant.

SiteSafe® Safety Signs

SiteSafe® produce rigid and self-adhesive, informational, directional, mandatory and warning safety signs for use in the workplace they are an important legal requirement and, naturally, all our products comply fully with the relevant Health & Safety legislation.

SiteSafe® is a specialist in this type of signage the range includes mandatory safety signs, no smoking signs, fire exit signs and warning signs - so if you require a specific sign that isn't shown here, whatever your requirements, please contact your local distributor and we'll be happy to help.

Polyurethane Tyre, Nylon Centre Wheel with Plain Bore

Suitable for use on most surfaces. Suitable for humid environments where medium harsh chemicals may be present. Quiet running with "cushioned" tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20C to 80C.

Swivel Type with Bolt Hole

Stainless Finish

Light Weight Steps

Utilising 19mm steel tube for a lighter step the 2 - 4 tread models use spring-loaded self-weight retractable castors; step onto the step and the rubber feet impact on the floor to immobilise the step to give maximum stability. The 5 - 6 models are fitted with a central braking system and fixed rear axle. These steps are ideally suited to light duty warehouse or office environments. Supplied in pacific blue as standard, signal red available if required. Price includes delivery (UK mainland).