Corner Braces - Countersunk Inside & Outside

Provide essential rigidity to the assemblies and reinforce right angle corner joints. Bright zinc plated steel.

Matlock Round Bar Pull Handles

Polished brass finish. 19mm roundbar pull handles.

Concealed Fix (19mm dia)

Matlock Kick Plates

Available in aluminium or satin stainless steel finishes.
Dimensions:
10 widths available: 676, 701, 712, 737, 776, 788, 801, 813, 876 and 901mm.
Height: 150mm.

Matlock Round Bar Pull Handles

Stainless steel finish. 19mm roundbar stainless steel pull handles. DDA & BS8300 Compliant.

Concealed Fix (19mm dia)

Matlock Round Bar Lever on Rose

119/0
Aluminium finish 19mm. DDA aluminium return to door lever on 50mm concealed sprung rose. Supplied with face fixing and bolt through screws. DDA & BS8300 compliant.

Medium Strap Hinges

Supplied as pairs. Commonly used for lift-up lids and traps.

CRANKED BANDS & HOOKS ON PLATE

Supplied packed in pairs in a polythene bag and complete with all fixing screws and bolts. Supplied individually, boxed in 5's.

Matlock Round Bar Pull Handles

Polished brass finish. 19mm roundbar pull handles.

Back to Back (19mm dia)

Panic Hardware

This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today's market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer's guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. Silver finish.

Double Panic Bolt Set (820)

Suitable for rebated double doors.
Certified for use on fire doors.
CE marked for safety. Tested to BS EN 179 and EN1125. 2 hour fire rated.

Door Controls

This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are each available in 26 different plated or colour coated finishes.
To help select the correct closer for you, each unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request.

BS EN1154 Classification
This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements.
Digit (1) - Category of use:
?3? denotes the unit is for closing doors from at least 105.
?4? denotes the unit is for closing doors from 180 open.
Digit (2) - Durability:
?8? successfully completed 500,000 test cycles.
Digit (3) - Test door mass/size:
Seven grades are identified as shown in the table below (where a
closer provides a range of power sizes both the minimum and
maximum sizes shall be shown):
Power size Test door mass Recommended door leaf width
1 20kg 750mm
2 40kg 850mm
3 60kg 950mm
4 80kg 1100mm
5 100kg 1250mm
6 120kg 1400mm
7 160kg 1600mm
Digit (4) - Fire behaviour:
?0? denotes the unit is NOT suitable for use on fire/smoke doors.
?1? denotes the unit IS suitable for use on fire/smoke doors.
Digit (5) - Safety in use:
?1? all door closer units are required to stisfy the essential requirement of safety in use.
Digit (6) - Corrosion-resistance:
?0? - indicates no defined corrosion-resistance,
?1? - indicates mild corrosion-resistance,
?2? - indicates a moderate level of corrosion-resistance,
?3? - indicates high corrosion-resistance,
?4? - indicates very high corrosion-resistance.
Within this section units have been tested to BS EN1154, with many units also having been tested to current Certifire testing and CE test criteria. Therefore, the 6 digit classification is shown against each of the varying units, thus indicating their performance and grading under BS EN1154.

An example of the grading for a 1559 closer unit would be as follows:

3 8 4/2 1 1 3
(1) (2) (3) (4) (5) (6)

Contract Door Closer - Mechanism Only

Silver finish. CE tested. Closing force size 2 - 4 (EN1154). Maximum door width 850 x 1100mm. Suitable for doors 40 - 80kg. Adjustable latch action. Fire tested to BS EN1634-1. 11/2 hour fire rated. Self handing (fits to left or right hinged doors). 180 opening (retains control of door when opened 180).
Specification:
CE Certified Number: 1239.
Meets EN1154: yes.
Fire tested to EN1634: 11/2 hours.
Power size: 2 - 4.
Application: universal.
Arm assembly: projecting arm.
Architectural cover: mechanism only or
92 cover.
Closing speed: adjustable.
Latch action: adjustable.
Stand open option: yes.
(NOT for use on fire doors).
Backcheck: no.
Delayed action: no.
Guarantee: 10 years.