BenchGuard

Highly absorbent paper ideal for protecting benches and surfaces against liquid spills. One side plastic coated to prevent soak through. Available in roll or sheet form. Rolls supplied in easy to use dispenser packs. Absorption rate: 400ml/m2.

Other sizes available on request.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

Sample Containers

Ideal for sample containment. CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Choice of plastic or metal flow seal cap. Leak tested in accordance with EN14254 Annexe D and BS5213. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture.

Plain Swab in a Peel Pouches

Ideal for immediate plating of swabs. Sterility: (IRR) Irradiated for sterility. (EO) Ethylene Oxide. Wood/Cotton applicator/tip.

Other applicators on request.

Petri Dish 140mm Triple Vent

Ideal for applications where a large surface area and very flat base are required. Easy grip ridges on the base to aid individual dish handling. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Produced and tested in accordance with the BS611 part 2 standard, which includes stringent dimensional controls. Ideal for use in automatic plate pourers. Sterility: (AS) Aseptic Manufacture.

Petri Dish 55mm Triple Vent

Ideal for use when savings in media or incubator space are required. 55mm dish accommodates 47mm membrane filters making it suitable for water testing. 50mm deep form dish (product code 124) is over 20mm deep and designed for use with liquid media. Aseptically manufactured under clean room conditions (class 7 ISO14644) to exclude microbiological contamination. Sterility: (AS) Aseptic Manufacture.

Other sizes available on request.

Pipettes, Pasteur Graduated Sterile

155mm Pipette. Ideal for transferring liquids safely. Manufactured from non-toxic, low density polyethylene. Integral filling bulb eliminates contamination associated with separate rubber bulbs. Excellent transparency and uniform thickness. Available in 2 versions with precise graduations of 1ml and 3ml, ensuring consistent results. Can be heat sealed for sample storage and transportation. Heat sealed bulbs suitable for storage in the gas phase of liquid nitrogen. Sterility: (IRR) Irradiated for sterility.

Other sizes available on request.

Pipettes with Suction Adaptor, Single Wrap

Sterilin single use, serological pipettes are manufactured using virgin grade polystyrene and to stringent quality specifications. All pipettes in our extensive range carry the following features: Gamma irradiated to ensure sterility and certified non-pyrogenic with an endotoxin level of below 0.25EU/ml. Batch specific certificate supplied in each carton. Lot number for complete traceability. Accuracy of plus/minus 1% for nominal volume. Clear black printed graduations for maximum clarity. Descending and ascending graduations to aid pipetting. Negative graduations for extra capacity. Colour coded for ease of identification. Sterility: (IRR) Irradiated for sterility. Available in 2ml, 5ml, 10ml and 50ml types.

Cuvettes

Suitable for use with most spectrophotometers for water analysis, chemistry and life science applications. Choice of material: - Optical quality polystyrene for use at visible wavelengths (340 to 900nm) - Optical quality acrylic (PMMA) for use at ultra violet wavelengths (300 to 900nm). Each case contains cuvettes from the same mould cavity to ensure minimal dimensional variation. Standard absorption variation between cuvettes is better than plus/minus 0.005 absorbency units. Two sizes available - semi-micro cuvette and macro cuvette. Standard path length of 10mm. Frosted sides on the cuvette. Recessed windows reduce the risk of scratching during use. For ease of use an arrow feature indicates the direction of light transmission. Packed in expanded polystyrene (EPS) foam trays for optimum protection ensuring scratch free product at the time of use. Material: (PS) Polystyrene. Sterility: (NS) non sterile.

Polystyrene Containers, 30ml Universal

CE marked in accordance with the European Directive 98/79/EC. For in vitro use only. Product is free standing with a conical base ideal for pellet formation. Unique leak tight cap ensures excellent sample containment. Leak tested in accordance with EN14254 Annexe D and BS5213. Suitable for centrifugation at 3,800 x g. Available pre-filled with boric acid (0.4g) for the preservation of urine samples. Aseptically manufactured under cleanroom conditions (class 7 ISO 14644) to exclude microbiological contamination. Manufactured from virgin polystyrene. All materials are non-cytotoxic. Sterility: (AS) Aseptic Manufacture. Materials base/cap: (PS/PP) Polystyrene, Polypropylene.