Dust/Mist Respirator Mask

Ergonomically pre-shaped for a more comfortable fit & unique DuraMesh design ensures optimum shape retention over long periods and is extremely comfortable to wear. The Ventex Valve uses low pressure valve technology which helps provide optimal airflow & significantly reduces heat & moisture inside the mask. The addition of an ActivForm seal (cushioned flange) in the nose area reduces the possibility of inward leakage by automatically adjusting to different face shapes. This means that unlike other traditional half-masks which rely on a user ?press-to-fit? technique, the Moldex New Generation respirator fits on contact & once attached to the face, the fit is retained & does not need further adjustment. For use against toxic dust, water & oil based fumes, mists & nuisance organic gas relief.
Complies with EN149:1991 FFP2S. Maximum Protection Level 10 x OEL. Pack of 10.

2435

2495 1-Strap (Valved) Dust/Mist Respirator

One strap makes the mask easy to put on and take off, fitted with a head harness as part of the strap ensures correct positioning and increases comfort. Foam nose piece
increases comfort and fit and a Ventex valve helps reduce
moisture and heat build up within mask. Reduced breathing resistance due to passing the dolomite test. For protection against toxic dusts, water and oil based mists and fumes.
Standard: EN149:2001 + A1:2009 FFP2 NR D.
NPF Nominal Protection Factor.
APF Assigned Protection Factor.
Protection Level:
12 x NPF. 10 x APF.

3505 Premium Mask

For protection against fine toxic dusts, mists and fumes, based on water and oil. The full face seal provides a safe and secure fit. The unique pleated filter technology reduces breathing resistance and the Ventex-valve minimises heat build-up, making this mask extremely comfortable. The Duramesh structure makes the mask strong and durable, reducing consumption and maintaining shape.
Supplied in packs of 5.
Standard: EN149:201 + A1:2009 FFP3 NR D.
NPF Nominal Protection Factor.
APF Assigned Protection Factor.

Protection Level:
50 x NPF.
20 x APF.

Replacement Cartridges To EN 141

A1 Gas Filter: Replacement cartridge for protection against organic gases and vapours. Suitable for working with solvents created by paints, paint sprays and adhesives.
A2 Gas Filter: Replacement cartridge suitable for protection against organic gases and vapours as A1 level, but to higher concentration level or for prolonged use.
A1B1E1K1 Gas Filter: Replacement cartridge suitable for protection against ammonia,acid gases, inorganic and organic gases and vapours.

Pre-Assembled Filter

A1P2 R for protection against organic gases and vapours to class 1 with a P2 particulate filter for protection against fine dusts, fumes, water and oil based mists/aerosols. Conforms to EN14387:2004 + A1:2008.

9120

Pre-assembled Masks

A1 Masks
To EN140/141
Pre-assembled medium half mask (8002) complete with 8100 gas filter cartridge, suitable for protection against organic gases and vapours.

ABEK1 Combination Mask To EN140/141
Pre-assembled medium half mask (8002) complete with 8900 gas filter cartridge suitable for protection against ammonia, acid-gases, inorganic and organic gases and vapours.

A1-P2S Masks
To EN140/141/143
Pre-assembled medium half mask (8002) complete with 8100 gas filter cartridge, 8070 particulate filter pad and 8090 filter holder.

Particulate Filter

P3 R filter for protection against fine toxic and carcinogenic dusts, fumes, water and oil based mists/aerosols. Conforms to EN143:2001 + A1:2006.

9030

Particulate Filter Pads





P3RD Filter Pad
Pre-filter giving protection against dusts,
water-based mists and fumes and liquid aerosols e.g. oil mists. Suitable for working with toxic metals, biochemical dusts and hardwoods. To EN 143.

Pre-assembled Masks

A1 Masks
To EN140/141
Pre-assembled medium half mask (8002) complete with 8100 gas filter cartridge, suitable for protection against organic gases and vapours.

ABEK1 Combination Mask To EN140/141
Pre-assembled medium half mask (8002) complete with 8900 gas filter cartridge suitable for protection against ammonia, acid-gases, inorganic and organic gases and vapours.

A1-P2S Masks
To EN140/141/143
Pre-assembled medium half mask (8002) complete with 8100 gas filter cartridge, 8070 particulate filter pad and 8090 filter holder.

Replacement Cartridges To EN 141

A1 Gas Filter: Replacement cartridge for protection against organic gases and vapours. Suitable for working with solvents created by paints, paint sprays and adhesives.
A2 Gas Filter: Replacement cartridge suitable for protection against organic gases and vapours as A1 level, but to higher concentration level or for prolonged use.
A1B1E1K1 Gas Filter: Replacement cartridge suitable for protection against ammonia,acid gases, inorganic and organic gases and vapours.