Accessories and Spares for 3M Jupiter™ Air Powered Respiratory Protection

Spares to suit 3M Jupiter™ Air Powered Respirator Kit (MMP-959-2600B)

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

Fit Test Kits

The revision of COSHH Regulations COSHH:2002, requires employers to conduct a fit-test on any employee wearing a tight fitting face pieces. Tight fitting face pieces include disposables, half masks and full face masks. The largest contributor to reduced respiratory protection is poor fit. Fit testing is an important requirement in the process of determining whether a given respirator is the correct respirator for a particular worker. Fit-testing helps determine that a particular model and size of respirator fits a worker so there is minimal face seal leakage. There are 2 fit testing methods: qualitative and quantitative. Generally, qualitative fit testing is acceptable for most disposables and half masks, although quantitative fit testing is required when negative pressure full face piece masks are used.



Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters.

3M™ Cup-Shaped Dust/Mist Respirator

Protects against moderate levels of dusts and water and oil based mists found in many industries.
Standard: EN149:2001 FFP2 NR D, CE Marked. Assigned Protection Factor: 10 x WEL (Nominal Protection Factor 12 x WEL).

8320

Half Masks

Use to attach 5911, 5925 or 5935 filters to any 6000 Series filters. (Except 6098 and 6099).

Mask to Filter Connection Retainers & Adaptors 3M 501 Retainer

3M™ Dust/Mist/Metal Fume Respirator - Valved

Lightweight, comfortable respirator which carries the highest filtering half-mask rating of FFP3. It can be used in most industrial applications where high level protection against solids and water or oil-based mists is required. Exhalation Cool Flow™ valve to prevent heat and moisture build-up. Soft face seal gives an improved fit and wearer comfort. Conforms to EN149:2001 + A1:2009 FFP3 NR D. 20 x WEL.
Supplied in packs of 10.

8833

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

Half Masks

Reusable respirators that combine new levels of wearer comfort with fully replaceable parts for maximum durability and quality. Available in three sizes of facepiece. Utilises
all of the 3M 2000, 5000 and 6000 series filters and
cartridges.
Soft silicone material provides unparalleled wearer comfort and face fit. Unique head harness and yoke design provides greater stability and more comfort. Durable and reusable respirator with replaceable parts.
Filters supplied separately.
EN140:1998/CE marked.

7500 Series

9913 Dust/Mist/Nuisance Level Odour Respirator

Provides relief from nuisance levels of organic vapours and respiratory protection against fine dusts. Designed to offer relief from the irritation of low levels of specific gases and vapours, often present alongside particulate hazards. Reliable, effective protection against fine particulates. Activated carbon layer provides relief from low levels of specific gases and vapours. Durable collapse resistant inner shell. Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap. Comfortable, lightweight off-the-face design.
Standard: EN149 2001 FFP1S
OEL Occupational exposure limit.
4x NPF Nominal Protection Factor.
4x APF Assigned Protection Factor.
Protection Levels:
4 x NPF Nominal Protection Factor
4 x APF Assigned Protection Factor

Particle Filters

Provide good protection against a wide range of respiratory hazards when fitted with suitable filters. Designed for low maintenance.