Particle Filters

Provide good protection against a wide range of respiratory hazards when fitted with suitable filters. Designed for low maintenance.

9913 Dust/Mist/Nuisance Level Odour Respirator

Provides relief from nuisance levels of organic vapours and respiratory protection against fine dusts. Designed to offer relief from the irritation of low levels of specific gases and vapours, often present alongside particulate hazards. Reliable, effective protection against fine particulates. Activated carbon layer provides relief from low levels of specific gases and vapours. Durable collapse resistant inner shell. Excellent fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap. Comfortable, lightweight off-the-face design.
Standard: EN149 2001 FFP1S
OEL Occupational exposure limit.
4x NPF Nominal Protection Factor.
4x APF Assigned Protection Factor.
Protection Levels:
4 x NPF Nominal Protection Factor
4 x APF Assigned Protection Factor

Particle Filters

Provide good protection against a wide range of respiratory hazards when fitted with suitable filters. Designed for low maintenance.

Gas Filters

Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase.
masks conform to: EN140.

3M Flat-Fold Particulate Respirator Mask - Valved

The 3M Aura™ 9432+ Particulate Respirator has a unique combination of features that help ensure the safety of workers and production: highly visible and metal detectable, the 9432+ is made without staples or small detachable parts. Exhalation Cool Flow™ valve to prevent heat and moisture build-up.
Conforms to EN149:2001 + A1:2009 FFP3 NR D.
Supplied in packs of 10.

9432+

Half Masks

Use to attach 5911, 5925 or 5935 filters to any 6000 Series filters. (Except 6098 and 6099).

Mask to Filter Connection Retainers & Adaptors 3M 501 Retainer

Accessories and Spares for 3M Jupiter™ Air Powered Respiratory Protection

Spares to suit 3M Jupiter™ Air Powered Respirator Kit (MMP-959-2600B)

Fit Test Kits

The revision of COSHH Regulations COSHH:2002, requires employers to conduct a fit-test on any employee wearing a tight fitting face pieces. Tight fitting face pieces include disposables, half masks and full face masks. The largest contributor to reduced respiratory protection is poor fit. Fit testing is an important requirement in the process of determining whether a given respirator is the correct respirator for a particular worker. Fit-testing helps determine that a particular model and size of respirator fits a worker so there is minimal face seal leakage. There are 2 fit testing methods: qualitative and quantitative. Generally, qualitative fit testing is acceptable for most disposables and half masks, although quantitative fit testing is required when negative pressure full face piece masks are used.



Qualitative RPE Face Fit Test Kit for FFP1, FFP2, FFP3 filtering facepieces and half facemask respirators fitted with particulate or combined filters.

3M 6000 Series Respiratory Protection

The 3M 6000 Series low maintenance full face mask features an impact resistant polycarbonate lens with a wide field of vision, a soft hypo-allergenic face piece with centrally mounted exhalation valve helps keep the mask cool and comfortable to wear. Whilst the four point adjustable harness ensures a comfortable and secure fit. The low profile side mounting design of the filters ensures an uninterrupted field of vision and are easy and quick to change, due to the unique bayonet filter fitting system. No costly maintenance or spare parts to purchase. Simply clean the mask as you would your normal respirator and it will provide good protection against a wide range of respiratory hazards when fitted with suitable filters, as well as eye and facial impact protection. Designed for low maintenance, maximum simplicity and comfort!

Conforms to: EN 136 Class 1.

Available in two sizes medium or large please refer to our catalogue.
Filters supplied separately.

6900S Full Face Respiratory Mask

3M 6000 Series Masks

Lightweight Soft hypo-allergenic face piece with centrally mounted exhalation valve helps keep the mask cool and comfortable to wear. Four point adjustable strap for a comfortable and secure fit. The low profile side mounting design of the filters ensures an uninterrupted field of vision. Easy and quick to change due to unique bayonet filter fitting system. No costly maintenance or spare parts to purchase. Simply clean the mask as you would your normal respirator.
Filters supplied separately.
Half face masks conform to: EN140