Cabinet Makers Planes

Shoulder and bull nose rebate planes manufactured from fine grey iron precision ground and polished for flatness and squareness. Fine adjustment for precise control of mouth size for fine or coarse work. The front of the plane can be removed to allow the planes to be used as a chisel plane for working into stopped rebates.

Jet Cut Tenon Saw

Impact resistant ABS plastic handle, securely fixed to the blade with two brass screws. Sprung steel blade with rigid steel back for precise control. 11 tpi.

Stanley Block Planes

Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The unmachined areas are coated in a durable high gloss epoxy coating. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.

4 1/2" Block Plane

Small professional plane made from close grained fine grey iron. Fully adjustable for depth of cut, cutter alignment and mouth opening. For end grain and general purpose fine finishing work. Comes with pouch for convenient storage. 40mm blade width.

Rabone Longlife Folding Rules

Traditional carpenter's extendable design allows convenient storage of a long straight measuring/marking out edge. Manufactured from tough engineering plastic with tipped ends. Colour: white.35 - 444: graduated mm, figured cm on both sides.35 - 445: graduated mm, figured cm one side, graduated 1/2", figured 1" other side.

JetCut Hand Saws

The FatMax heavy duty saw has a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30% and have 3 sided precision ground teeth which offer razor sharp cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long.

Fine Finish Saw

Bi-material handle screwed and ultrasonically welded for comfort and security. Teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke increasing cutting efficiency by 30%. 3 sided precision ground teeth offer razor sharp cutting edges at every stage of the stroke. Induction hardened teeth stay sharper twice as long.
Length: 22in/550mm, 11 TPI

FatMax

Bull Nose Plane

Manufactured from fine grey cast iron. All working surfaces are accurately ground and polished. Allows rebates to trim right to the edge. Lightweight, ideal or trimming rebates. Blade cutter width: 29mm.

No.4 Bailey Bench Planes

The base of the planes are manufactured from cast fine grey iron, all the contact surfaces are precision ground and polished to produce a stable platform for the blade. The unmachined parts are coated with a durable, high quality epoxy coating for long lasting protection against corrosion. The blade is manufactured from high carbon steel polished and precision ground, for a sharp long lasting edge. The blades are fully adjustable for depth of cut, alignment to the work surface and mouth size. The Frog with brass adjusting nut provides precise adjustment of the blade. The handles are virtually unbreakable and contoured to fit comfortably into the hand for improved control and reduced fatigue when in use.

Smoothing Planes

For general purpose applications and fine finishing of high quality work.

No.4 Bailey Bench Planes

The base of the planes are manufactured from cast fine grey iron, all the contact surfaces are precision ground and polished to produce a stable platform for the blade. The unmachined parts are coated with a durable, high quality epoxy coating for long lasting protection against corrosion. The blade is manufactured from high carbon steel polished and precision ground, for a sharp long lasting edge. The blades are fully adjustable for depth of cut, alignment to the work surface and mouth size. The Frog with brass adjusting nut provides precise adjustment of the blade. The handles are virtually unbreakable and contoured to fit comfortably into the hand for improved control and reduced fatigue when in use.

Fore Plane

Fully adjustable metal plane for stock removal and truing up long edges or levelling wide boards. Kidney shaped lever cap screw hole prevents accidental slippage of cutter. Chrome carbon steel cutter hardened and tampered to retain a keen cutting edge. Fully adjustable frog for all tasks and timber types. Polypropylene handle and knob shaped for comfort. Finger tip adjustment for depth of cut and cutter alignment. Tight fitting spring steel cap iron for perfect shaving flow. Precision cast fine grey iron base for stability and wear resistance. Precision ground base and sides ensure performance to the highest tolerances. 460mm base x 60mm blade width.

Stanley Block Planes

Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The unmachined areas are coated in a durable high gloss epoxy coating. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.

7" Block Plane

For general purpose applications. 40mm cutter width.