Kennedy Tool Pouches, Holsters and Belts

Kennedy tool pouches, tool holsters and belts are for the professional tradesman or the keen DIY'er. They are an ideal way to keep your tools close at hand when on site.

Our range includes products suitable for both indoor and outdoor use. They are available in a choice of materials from fully waterproof oil tan leather, full grain leather, split or suede leather or man made nylon and polyester fabrics.

Tool and Nail Pouch

Manufactured from Chrome leather.
5 Tool/nail pockets.
1 Tool loop.

Belt Not Supplied.
Tools Not Included.

Box Inserts

Suitable for use in 250 series cabinet drawers, compact toolboxes and service cases to clearly separate small components or tools. Can be mixed and matched to meet your specific storage needs. Manufactured from opaque polypropylene, resistant to cracking, low temperatures and acid.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Castors

For cabinet and chest compatibility, please refer to our catalogue.

Kennedy Service Engineer's Case

Service case with wheels. Case manufactured from high impact thermoplastic, with corrosion-resistant aluminium reinforced hinges and trim. With two expandable document pockets and two hinged and fitted tool boards with elasticated tool retaining loops. Shockproof vac formed polystyrene bottom storage tray with fixed compartments supplied complete with four small component boxes. The two 38mm wide rubber wheels and retractable telescopic aluminium handle allows the case to be moved when fully loaded with the minimum of effort. Double locking with two keys. Strong eough to be used to transport tools when travelling by aircraft. Tools not included.

Service Cases

Manufactured from co-polymer plastic. Resistant to denting, scratching. Virtually unbreakable. Suitable for transporting and storing smaller items, with opaque lids that allow the contents to be seen at a glance. The lids have three hinges for increased strength and durability, sliding catches securely hold the lid closed. Available with either fixed compartments or without, so that you can select divider inserts to meet your requirements. All cases are fitted with feet to allow them to be stored in the vertical position.

Tool Chest

Epoxy power coated with new soft bumpers with damper effect fitted on the 4 angles and on drawers protecting the aluminum hook. Work top with built-in handle, slots for 16 screwdrivers, vice fastening possible and tube accessories. Exclusive FACOM designed handles ensuring easy grip made from anti-oxidation anodized aluminum. Drawers open to 100%.

JET.C4M3

Stackable on a rolling chest of same dimension for the 3 ranges and on the rolling chest for the M3 version - supplied with a linking kit for easy and secured fitting of the unit.
Overall dimensions (including worktop): L774 x D546 x H480mm
Effective drawer dimensions: L569 x D421 x H60-130mm
Drawer sizes:
3@ 60mm high drawers
1@ 130mm high drawer
Total load acceptable in the drawers: 85kg
Useful storage volume: 75 litres
Weight: 45.0kg

Box Inserts

Suitable for use in 250 series cabinet drawers, compact toolboxes and service cases to clearly separate small components or tools. Can be mixed and matched to meet your specific storage needs. Manufactured from opaque polypropylene, resistant to cracking, low temperatures and acid.

Drawers/Dividers for Senator® Small Parts Storage Cabinet Range

Drawers:
Small: (H)36.5 x (W)54 x (L)140mm
Medium: (H)59 x (W)140 x (L)140mm
Large: (H)59 x (W)280 x (L)140mm

Dividers:
Small: 50 x 29mm (Pk 10)
Medium/Large: 133 x 50mm (Pk 5)

60 Drawer Small Parts Storage Cabinet shown for illustration purposes only (SEN-593-5220K)

Senator® Roller Tool Cabinet

Double thickness side walls with welded joints and a hard wearing epoxy powder coating. I-beam draw slides with double sliders on base drawer. 100mm rubber castors with brakes fitted to two end castors. Fully locking. Castors are rated to 40kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

7 Drawer Roller Tool Cabinet

Overall dimensions (W x D x H): 668 x 458 x 885mm.
Drawer sizes (W x D x H):
591 x 410 x 51mm (4).
591 x 410 x 102mm (2).
591 x 410 x 204mm (1).

Tool Vault

Substantial construction from 1.2mm, 1.6mm, 2mm and 2.5mm sheet steel with powder coated finish and an advanced XLOCK - four point locking system. This system operates with one lock and one key and has worldwide patents pending. All boxes are supplied with two keys and are numbered for an optional replacement key service. Fitted with anti-jemmy bars all round, twin hydraulic arms, drop down handles and a full width split heavy duty piano hinge. Covered by a three year's manufacturer's warranty for defective parts.

Sentri XLOCK Tool Vault

442
Made from 2mm and 2.5mm sheet steel with a red powder coated finish fitted with removable drip tray to contain spillage. High and low level louvred venting with internal mesh to allow fumes to escape. With warning label and forklift/pallet truck skids with a facility for bolting wheels.

Overall size (L x H x W): 1168 x 600 x 1275.
internal size (L x H x W): 1130 x 570 x 1200mm.

Weight: 140kg.

Delivery subject to availability.