Magnetic Trays

Heavy duty tool/parts tray with durable hardwearing corrosion resistant powder coated finish. High strength permanent magnets with protective rubber coating ensure the tray securely attaches to any flat ferrous metal surface, without damaging it. The extended rear stabilizing plate with protective rubber guard increases the force required to remove the magnets from the surface their attached to, increasing the holding capacity of the tray.Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment..



Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
Three high strength permanent magnets. Tray size: 210 x 115 x 31mm (81/5 x 41/2 x 11/5")
Rear stabilizing plate size: 210 x 125 mm (8" x 5")
Weight capacity: 800g.

Kennedy Extra Large Roller Tool Cabinets

Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Uses 14" drawer slides and Type B lid stays.

7 Drawer Extra Large Roller Tool Cabinet

Overall dimensions: (W)1060 x (D)480 x (H)925mm.
Internal compartment dimensions
Bottom compartment (W x D x H):
400 x 460 x 300mm.
400 x 460 x 415mm.
Drawer sizes (W x D x H):
580 x 415 x 50mm (4).
580 x 415 x 100mm (2).
580 x 415 x 150mm (1).

2 Drawer Step-up Units

Thicker gauge steel, electro-coated enamel finish for superior appearance and protection. Steel panels in the drawers for extra rigidity, ball bearing drawer runners. Supplied with drawer liners and top mat.



Drawer sizes: 2 590.5 x 410 x 102mm.

Kennedy 7 Drawer Stainless Steel Roller Cabinet

Manufactured from heavy gauge stainless steel with double wall construction side panels and welded joints for added rigidity. Quick release smooth running ball bearing drawer slides. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Suitable for use in health and catering environments.
7 Drawer
Drawer sizes (W x H x H):
5, 597 x 428 x 90mm.
1, 597 x 428 x 135mm.
1, 597 x 428 x 180mm.

EXTRA HEAVY DUTY TOOL CHEST & CABINETS

This cabinet is made from a heavier gauge steel, welded and riveted to give this Extra Large cabinet an extremely rigid construction. The corrosion resistant powder coated finish provides superb durability. The locking mechanism locks all the closed drawers which have individual safety catches to prevent accidental opening. The cabinet has four heavy duty castors, two fixed and two swivel which when combined with the heavy duty side handle enable the user to move it with ease. All drawers have smooth running ball bearing drawer slides, aluminium edged handles.
Drawer dimensions (W x D x H):
1 x (560 x 390 x 40mm)
4 x (560 x 390 x 65mm)
1 x (560 x 390 x 95mm)
1 x (560 x 390 x 205mm)

Overall measurements including handles: 740 x 460 x 995mm.

Extra Heavy Duty Roller Cabinet

Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

3 Drawer

Dimensions:
Top compartment size: 89 x 661 x 150mm.
Drawer sizes:
51 x 591 x 282mm (1).
102 x 591 x 282mm (2).

Roller Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

5 Drawer Roller Tool Cabinet

Overall dimensions: 860 x 690 x 460mm. Drawers: 4 591 x 410 x 102mm. 1 591 x 410 x 204mm. Overall dimensions: A 690mm. B 890mm. C 460mm.

9 Drawer Extra Deep Toolchest

Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides. Supplied with top mat and drawer liners. Fully locking. Drawer loads should be evenly distributed.



Over 25% deeper than standard size tool chests for extra storage.
Overall dimensions (W x D x H): 660 x 405 x 510mm.
Drawer dimensions (W x D x H):
295 x 405 x 50mm (6).
595 x 405 x 50mm (2).
595 x 405 x 100mm (1).

Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

12 Drawer Tool Chest

Top compartment size: 89 x 661 x 150mm.
Drawer sizes:
51 x 127 x 410mm (6).
153 x 172 x 410mm (1).
51 x 591 x 410mm (2).
75 x 127 x 410mm (2).
102 x 591 x 410mm (1).

Roller Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

7 Drawer