Kennedy Professional Roller Tool Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

3 Drawer Roller Tool Cabinet
Overall size (W x D x H): 690 x 460 x 890mm.
Drawer sizes (W x D x H): 591 x 410 x 102mm (3).
Bottom compartment (W x D x H): 610 x 432 x 356mm.

What "Car Mechanics" magazine say..."Best Buy"

"Amazing value for such a high quality product. Everything about this cabinet is well designed, almost to the point of blatant over engineering. The large wheels are metal, with rubber strip "tyres" around their edges. There are even grease screws fitted, so the bearings can be lubricated. All drawers feature positive stop resistance, which means they need a good yank to open – so you don't need to lock them prior to moving the cabinet. Roller bearing slides are used throughout, and even the keys are an unusual, high security, design."

Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

6 Drawer Tool Chest

Top compartment size: 660 x 150 x 90mm.
Drawer sizes (W x D x H):
2 125 x 285 x 50mm.
1 280 x 285 x 150mm.
2 590 x 285 x 50mm.
1 590 x 285 x 100mm.

Roller Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

7 Drawer

Kennedy Professional Tool Chest

Manufactured from extra thick heavy gauge steel fitted with heavy duty piano hinges, lid stays and extra strength carry handles. Supplied with tote tray and drawer liners. One piece smooth running ball bearing drawer slides with double sliders on base drawer. Epoxy powder coated finish with reinforced corner tabs.

3 Drawer Professional Tool Chest

Dimensions:
Top compartment size: 89 x 661 x 150mm.
Drawer sizes:
51 x 591 x 282mm (1).
102 x 591 x 282mm (2).

Kennedy Heavy Duty Top Opening Toolboxes

Manufactured from heavy gauge steel with all welded construction. Durable corrosion resistant two part epoxy powder coat finish. Quick release lid clasps and removable tote tray for smaller tools and components. Can be padlocked for additional security (padlock not included). Supplied with fixed carry handle on the lid. Available in 2 sizes.

19" Heavy Duty Top Opening Toolbox

Dimensions (L x W x D): 480 x 180 x 180mm.

Kennedy Professional Roller Tool Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

7 Drawer Roller Tool Cabinet
Overall size (W x D x H): 690 x 460 x 890mm.
Drawer sizes (W x D x H):
591 x 410 x 51mm (4).
591 x 410 x 102mm (2).
591 x 410 x 204mm (1).

What "Car Mechanics" magazine say..."Recommended"

"This is similar to the Best Buy (KEN-594-5500K), but obviously bigger and dearer. Also the, ever useful, storage compartment is replaced by extra drawers. One common factor, though, is the excellent build and design quality. Again, all drawers are on bearing slides. And the deep drawers even have double sliders on each side – to cope with heavy tool loadings. The wheels are the same rubber-rimmed metal models too, and they also feature grease screws. Kennedy has even included a decent, if rather thin, rubber cab top, plus drawer liners."

EXTRA HEAVY DUTY TOOL CHEST & CABINETS

Manufactured from a heavier gauge steel, welded and riveted to form an extremely rigid construction. The corrosion resistant powder coated finish provides superb durability. The locking mechanism locks all drawers as the lid is closed and each drawer has its own safety catch to prevent accidental opening for added security. The chest has four heavy duty type carry handles with comfortable grips for easier lifting of this extra large chest. The lid has a full width piano hinge giving extra rigidity, strength and additional security. The drawers have smooth running ball bearing drawer slides, rigid aluminium edged handles.
Drawer dimensions (W x D x H):
2 x (305 x 340 x 40mm)
1 x (305 x 340 x 65mm)
1 x (305 x 340 x 180mm)
2 x (560 x 340 x 40mm)
2 x (560 x 340 x 65mm)
1 x (560 x 340 x 95mm)

Overall measurements including handles: 1090 x 450 x 530mm.

Extra Large, Extra Heavy Duty Tool Chest

Kennedy 7 Drawer Stainless Steel Roller Cabinet

Manufactured from heavy gauge stainless steel with double wall construction side panels and welded joints for added rigidity. Quick release smooth running ball bearing drawer slides. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent re-location when loaded and should only ever be pushed. Suitable for use in health and catering environments.
7 Drawer
Drawer sizes (W x H x H):
5, 597 x 428 x 90mm.
1, 597 x 428 x 135mm.
1, 597 x 428 x 180mm.

Magnetic Trays

Heavy duty tool/parts tray with durable hardwearing corrosion resistant powder coated finish. High strength permanent magnets with protective rubber coating ensure the tray securely attaches to any flat ferrous metal surface, without damaging it. The extended rear stabilizing plate with protective rubber guard increases the force required to remove the magnets from the surface their attached to, increasing the holding capacity of the tray.Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment..



Steel tool/parts tray with durable hardwearing corrosion-resistant powder coated finish. Suitable for keeping small parts, components and tools near to hand when working on vehicles, domestic appliances and other equipment. Three high strength magnets in protective non-scratch rubber coating.
Four high strength permanent magnets.
Tray Size: 270 x 115 x 31mm (10 5/8" x 4 1/2 " x 1 1/4")
Rear stabilizing plate size: 270 x 125mm (10 5/8" x 5")
Load capacity: 1,000g.

2 Drawer Step-up Units

Thicker gauge steel, electro-coated enamel finish for superior appearance and protection. Steel panels in the drawers for extra rigidity, ball bearing drawer runners. Supplied with drawer liners and top mat.



Drawer sizes: 2 590.5 x 410 x 102mm.