Kennedy Tool Control Cabinet Set

Professional Pliers:- 1x 160mm snipe nose, 1x 160mm diagonal cutters, 1x 160mm combination.
Metric Professional Combination Wrenches:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm.
Pro-Torq screwdrivers: Crosspoint: No.2 x stubby, No.2 x 100mm, Pozidriv(r): No.1 x 75, No.2 x 100, No.3 x 150mm, Flared: 6.3 x 150, 8.0 x 200mm, Parallel: 5.0 x 150mm

25 Piece Set With Professional Roller Cabinet TCC025

AET100 107 Piece Apprentice Engineer's Tool Kit

Supplied in a robust toolbox c/w double latch.

Contents:
6 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75 and No.2 x 100mm, Flared 6.3 x 100 and 8.0 x 250mm, Parallel 5 x 100 and 5 x 200mm.
6 piece precision screwdriver set: Crosspoint PH0 and PH1, Parallel 1.4, 2.0, 2.4 and 3.0mm.
10-17mm 8 piece metric combination spanner set.
9 piece metric hex key set: 1.5-10mm.
8 piece 2nd cut file set: 1 each flat, hand, round, half round, 3 square and square.
12 piece 2nd cut needle file set: 1 each: hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
2 of each grade 0, 1 and 2 emery sheets.
Adjustable spanner 25mm capacity.
18 blade metric/inch feeler gauge.
Magnetic pick-up tool extends to 650mm.
7.5m/25ft locking tape rule.
Snap-off blade knife.
Junior hacksaw.
20 junior hacksaw blades.
300mm (12") hacksaw frame.
6 hacksaw blades.
General-purpose shears.
160mm snipe nose pliers.
160mm diagonal cutting pliers.
160mm combination pliers.
255mm straight jaw grip wrench.
6mm x 150mm flat cold chisel.
450g ball pein hammer.
175mm engineers' scriber.
30mm diameter inspection mirror (extends to 650mm).
150mm (6") engineers' square.
Centre punch.
150mm (6") pocket rule.
100cc grease gun.
Eye loupe.

Kennedy Pro Torq Maintenance Tool Bag & Kit

Supplied in a heavy duty tear resistant tool bag with reinforced stitched edging. Velcro fastening flap with soft touch carry handle and double webbed shoulder strap fixed with metal release clasps. All Pro Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.

Contents:
Electricians tool bag: 320 x 340 x 125mm.
2 small bits organiser cases.
1 tool board unique system to secure tools whilst in transit.
140mm (5,1/2") autoload & lock knife - 13 segment snap-off blade.
165mm (6,1/2") Diagonal Pro-Torq nippers.
150mm (6") Snipe nose Pro-Torq pliers with side cutter.
6-piece Pro-Torq screwdriver set: Crosspoint: No.1 x 75, No.2 x 100, Flared: 6.3 x 100, 8.0 x 200, Parallel: 5.0 x 75, 5.0 x 150mm.
7-piece Pro-Torq precision screwdriver set: Parallel tips 1.4, 2.0, 2.4 and 3.0mm, Crosspoint tips PH0-3, PH0-2 PH-0.
200mm (8") Soft grip phosphate adjustable wrench.
8-piece Pro-Torq hex wrench set on clip 1.5-8.0mm.

Pro Torq Maintenance Tool Bag & Kit - 29 Piece

22 Piece Plumbers Kit

22 Piece Plumbers Kit supplied in a robust toolbox c/w double latch.Contents: 255mm (10") stillson wrench. 3 - 22mm capacity tubing cutter. 3 - 41mm tube deburrer. 9.5 - 32mm basin wrench. 300mm girder section spirit level. Telescopic inspection mirror. Junior hacksaw frame c/w hardened blade. Pad saw. 255mm groove slip joint waterpump plier. 6 piece flat wood bit set 9.5 - 25mm230mm . 12mm x 12M ptfe thread sealing tape to bs6920. 100gm fluxite paste. Powerflow lead free solder 3.25mm 250g. 3 row plastic handle wire scratch brush. 450 gm (1lb) grade 2 wire wool. Blow lamp & 2175 gas cartridge.

Electricians VDE Tool Bag Tool Kit - 16 Piece

Heavy duty tear resistant tool bag with reinforced stitched edge velcro fastening flap with soft touch carry handle and double webbed shoulder strap fixed with metal release clasps. 2 removable tool boards (1 velcro fasten) are kept inside which have a unique tool storage securing system built in.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools are VDE approved.

Kennedy Tool Control Cabinet Set

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22mm. Deep Sockets: 10, 11, 12, 13, 14, 15, 17, 19 & 22mm. Screwdriver Bits:- Slotted 5, 5.5 and 6.5mm. Crosspoint: No.1, 2, 3, and 4. Hex Bits: 3, 4, 5, 6, 8 and 10mm. Accessories: Ratchet handle, sliding T-handle, spinner handle, swivel handle. Universal joint. 125 and 250mm extensions, 250mm wobble extensions, 1/4" and 1/2" male adaptors, 1/4" hex bit coupler.

50 Piece Set With Professional Roller Cabinet TCC050

Kennedy Tool Kits

The Kennedy computer technicians 49 piece tool kit contents all the essential tools required for on site servicing of IT equipment all supplied in a Kennedy Professional tool and lap top bag; that is manufactured from a 600 Denier fabric that is exceptional durable and hard wearing.

With large internal compartments (one padded for a laptop), pockets and elasticated tool holders it will help to ensure you have the right tool on site when you require it.

Features include:
Adjustable shoulder strap.
3 Large internal compartments.
15 Internal pockets.
2 External pockets.
Padded laptop holder.
46 elasticated tool holders.
Padded handles and strap.
Business card holder.
Heavy duty zips and rubber feet.

Computer Technicians Tool Kit

The kit is supplied in a Kennedy professional tool and
lap top bag.

Contents:
Hexagon wrench set 1.5 to 6mm.
Precision nut driver set 3.0, 3.5, 4.0, 4.5 and 5.0mm.
Flat blade precision tweezers 170mm.
Sharp nose precision tweezers 115mm.
3 in 1 multimeter.
Micro diagonal nipper 110mm.
Automatic wire stripper 0.2 to 6mm capacity.
Insulated VDE Screwdriver Set: Parallel: 2.5x85mm, 4.0x100mm, 5.5x125mm, 6.5x150mm. Crosspoint: No.0x75mm, No.1x100mm, No. 2x200mm.
Crimping tool, capacity 8P8C/RJ-45, 6P/RJ-12, RJ-11 and 6P2C.
Cable ties, black, 2.5 x 160mm packet of 100.
Precision screwdriver set (in zip case): parallel 1.4 x 40mm, 2.0mm x 40mm, 2.4mm x 75mm 3.0mm x 75mm and 4.0mm x 100mm blade length; crosspoint PH0-3 x 40mm, PH0-2 x 75mm, PH-0 x 75mm and PH1 x 100mm blade length.
ESD long nose pliers 130mm.
ESD bent nose pliers 140mm.
ESD flat nose pliers 130mm.
Edison aluminium torch.
Black PVC insulation tape 19mm x 33m.
Air duster 400ml.
Absorbent wipes (pack of 50).
Screen wipes (pack of 50).
1x pair Polyco pure dex antistatic gloves.
Non-contact AC voltage detector.
Retractable blade knife.
Brushes: No.6 and No.10 flat fitch.

Set contents may vary slightly subject to product development and availability.

25 Piece Decorators Preparation Kit

Contents:
5 x dust masks 5 x sheets grade 0 glass paper & grade 2 glass paper 50mm half tang scraper 75mm half tang scraper 38mm chisel point half tang putty knife 200mm half tang combination shavehook. Window scraper Sanding block - fine & medium. 310ml cartridge of decorators acrylic chaulk. 310ml cartridge gun - plastic. 460mm canvas tool bag.

Kennedy AET200 Apprentice Engineers Tool Kit

Supplied in a 3 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

3 Drawer Top Chest:
Top compartment size 89 x 661 x 150mm, drawer sizes 51 x 591 x 282mm (x1), 102 x 591 x 282mm (x2).
3 Drawer Roller Cabinet:
Bottom compartment size 610 x 432 x 356mm, drawer size 591 x 410 x 102mm (x3).

AET200 Apprentice Engineers Tool Kit (208 Pieces)

Contents:
25 piece HSS drill set 1-13.00mm x 0.5mm.
6 piece 200mm double cut engineers' file set.
6 piece 16cm cut 2 assorted needle file set.
25x 230 x 280mm assorted emery sheet.
200mm chrome vanadium steel adjustable spanner.
6 x 150mm flat cold chisel.
19mm x 33m black PVC insulation tape.
76mm 18 blade combination feeler gauge set.
4.8mm square head centre punch.
150mm/6" stainless steel rule c/w pocket clip.
178mm double ended engineers' scriber.
Eye loupe.
Adjustable telscopic 30mm dia inspection mirror (expands to 180mm).
6 piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
150mm (6") engineers' square - BS939 grade B.
Tap wrenches 1.5-6.4mm and 6.4-19mm.
Magnetic telescopic pick-up tool extends to 550mm.
29 piece engineers' bit set: all 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm. Flat: 3, 4, 5, 5.5, 6.5 and 8mm, 3/32", 1/8", 5/32", 3/16", 1/4", 7/32" and 5/16". Crosspoint: No.1, 2 and 3. Pozidriv: No.1, 2 and 3.
450g(1lb) ball pein hammer wood shaft.
7.5m/25ft steel tape.
Snap-off 8 segment blade economy knife.
Retractable trimming knife with 5 blades.
Junior hacksaw frame.
300mm lightweight professional hacksaw frame.
6 off 12" x 1/2" x 18t HSS hacksaw blades.
20 junior hacksaw blades.
2 plastic handle household scissors.
150mm snipe nose plier with side cutter.
150mm diagonal cutting nipper.
150mm engineers' combination pliers with side cutter.
250mm curved jaw high strength grip wrench.
8 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75, No.2 x 100, Pozidriv No.2 x 100, Flared 6.3 stubby, 6.3 x 100, 8.0 x 200, Parallel 5.0 x 75, 5.0 x 150.
14 piece combination spanner set 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
25 piece metric socket set 1/2" square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
9 piece metric hex key set 1.5-10mm.

'Live Line' VDE Tool Kit - 17 Piece

Supplied in heavy duty tear resistant tool roll with reinforced stitched edging. 2 metal rings for hanging on to a wall when opened. 20 pockets, 18 elasticated tool loops are stitched on the inside. A velcro fastening secures the roll when shut with a riveted carry handle on the outside.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools VDE approved.