22 Piece Plumbers Kit

22 Piece Plumbers Kit supplied in a robust toolbox c/w double latch.Contents: 255mm (10") stillson wrench. 3 - 22mm capacity tubing cutter. 3 - 41mm tube deburrer. 9.5 - 32mm basin wrench. 300mm girder section spirit level. Telescopic inspection mirror. Junior hacksaw frame c/w hardened blade. Pad saw. 255mm groove slip joint waterpump plier. 6 piece flat wood bit set 9.5 - 25mm230mm . 12mm x 12M ptfe thread sealing tape to bs6920. 100gm fluxite paste. Powerflow lead free solder 3.25mm 250g. 3 row plastic handle wire scratch brush. 450 gm (1lb) grade 2 wire wool. Blow lamp & 2175 gas cartridge.

Kennedy Tool Control Drawer Set

CAD designed and high precision laser cut foam tray inserts are designed to keep tools precisely and accurately in the correct position in the drawer for improved productivity. In some applications a dropped tool is a serious hazard, colour contrasting foam inserts are used to easily recognise lost tooling and also reduce audit time.

TCD050 DL2 Tool Control Drawer Set (50 Pieces)

Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22mm.
Deep Sockets: 10, 11, 12, 13, 14, 15, 17, 19 and 22mm.
Screwdriver Bits: Slotted 5, 5.5 and 6.5mm, Crosspoint No.1, 2, 3, and 4, Hex 3, 4, 5, 6, 8 and 10mm.
Accessories: ratchet handle, sliding T-handle, spinner handle, swivel handle, universal joint, 125 and 250mm extensions, 250mm wobble extensions, 1/4" and 1/2" male adaptors, 1/4" hex bit coupler.

25 Piece Decorators Preparation Kit

Contents:
5 x dust masks 5 x sheets grade 0 glass paper & grade 2 glass paper 50mm half tang scraper 75mm half tang scraper 38mm chisel point half tang putty knife 200mm half tang combination shavehook. Window scraper Sanding block - fine & medium. 310ml cartridge of decorators acrylic chaulk. 310ml cartridge gun - plastic. 460mm canvas tool bag.

Kennedy Basic Service Tool Kit

Suitable for use by the service engineer, the electrician and tradesman. All the Kennedy industrial quality tools carry a quality guarantee.

Basic Service Tool Kit (56 Pieces)

Contents:
430 x 340 x 160mm abs plastic, aluminium reinforced, tool case.
150mm chrome adjustable wrench.
19mm x 33m black PVC insulation tape.
150mm mains tester range 125/250V.
Soldering iron 25W 240V.
Desoldering gun.
17g 1.0mm dia 60/40 cored solder.
115mm sharp nose precision tweezers.
30mm diameter inspection mirror (handle extends up to 480mm). 7.5m/25ft steel tape.
13 segment-blade mini autolock retract knife.
Junior hacksaw frame and blade.
Magnetic pick up tool (extends to 550mm).
160mm snipe nose plier.
160mm diagonal cutting nipper.
160mm engineers' combination plier with side cutter.
150mm insulation and wire stripping plier.
115mm precision nippers.
115mm precision end cutting nippers.
Chrome vanadium blade screwdrivers: crosspoint No.0, 1 and 2PT, slotted 6mm, supadriv No.0, 1 and 2PT.
Offset screwdrivers: 5mm slot x No.1 pt, 6mm slot x No.2 pt. Insulated screwdrivers: parallel 4 x 100mm 1000V VDU, slotted 2.5 x 85mm. 20mm sash tool.
11 piece screwdriver and tool set: parallel 1, 1.2, 1.4, 1.8, 2.4 and 3mm, crosspoint PHO-2, PHO and PH1, fine point awl and tweezers.
9 piece hex key set 1.5-10mm.
Chrome vanadium combination spanners: 5.5, 6, 7, 8, 9 and 10mm.

AET100 107 Piece Apprentice Engineer's Tool Kit

Supplied in a robust toolbox c/w double latch.

Contents:
6 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75 and No.2 x 100mm, Flared 6.3 x 100 and 8.0 x 250mm, Parallel 5 x 100 and 5 x 200mm.
6 piece precision screwdriver set: Crosspoint PH0 and PH1, Parallel 1.4, 2.0, 2.4 and 3.0mm.
10-17mm 8 piece metric combination spanner set.
9 piece metric hex key set: 1.5-10mm.
8 piece 2nd cut file set: 1 each flat, hand, round, half round, 3 square and square.
12 piece 2nd cut needle file set: 1 each: hand, flat, knife, round, half round, square, 3 square, crossing, round edge joint, slitting, warding and barrette.
2 of each grade 0, 1 and 2 emery sheets.
Adjustable spanner 25mm capacity.
18 blade metric/inch feeler gauge.
Magnetic pick-up tool extends to 650mm.
7.5m/25ft locking tape rule.
Snap-off blade knife.
Junior hacksaw.
20 junior hacksaw blades.
300mm (12") hacksaw frame.
6 hacksaw blades.
General-purpose shears.
160mm snipe nose pliers.
160mm diagonal cutting pliers.
160mm combination pliers.
255mm straight jaw grip wrench.
6mm x 150mm flat cold chisel.
450g ball pein hammer.
175mm engineers' scriber.
30mm diameter inspection mirror (extends to 650mm).
150mm (6") engineers' square.
Centre punch.
150mm (6") pocket rule.
100cc grease gun.
Eye loupe.

'Live Line' VDE Tool Kit - 17 Piece

Supplied in heavy duty tear resistant tool roll with reinforced stitched edging. 2 metal rings for hanging on to a wall when opened. 20 pockets, 18 elasticated tool loops are stitched on the inside. A velcro fastening secures the roll when shut with a riveted carry handle on the outside.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools VDE approved.

Kennedy AET200 Apprentice Engineers Tool Kit

Supplied in a 3 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed.

3 Drawer Top Chest:
Top compartment size 89 x 661 x 150mm, drawer sizes 51 x 591 x 282mm (x1), 102 x 591 x 282mm (x2).
3 Drawer Roller Cabinet:
Bottom compartment size 610 x 432 x 356mm, drawer size 591 x 410 x 102mm (x3).

AET200 Apprentice Engineers Tool Kit (208 Pieces)

Contents:
25 piece HSS drill set 1-13.00mm x 0.5mm.
6 piece 200mm double cut engineers' file set.
6 piece 16cm cut 2 assorted needle file set.
25x 230 x 280mm assorted emery sheet.
200mm chrome vanadium steel adjustable spanner.
6 x 150mm flat cold chisel.
19mm x 33m black PVC insulation tape.
76mm 18 blade combination feeler gauge set.
4.8mm square head centre punch.
150mm/6" stainless steel rule c/w pocket clip.
178mm double ended engineers' scriber.
Eye loupe.
Adjustable telscopic 30mm dia inspection mirror (expands to 180mm).
6 piece parallel pin punch set: 2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.
150mm (6") engineers' square - BS939 grade B.
Tap wrenches 1.5-6.4mm and 6.4-19mm.
Magnetic telescopic pick-up tool extends to 550mm.
29 piece engineers' bit set: all 6mm hex x 25mm overall length, complete with magnetic spinner handle, 6mm hexagon bit adaptor and 6mm square socket adaptor. Hexagon: 2, 3, 4, 5, 6, 7 and 8mm. Flat: 3, 4, 5, 5.5, 6.5 and 8mm, 3/32", 1/8", 5/32", 3/16", 1/4", 7/32" and 5/16". Crosspoint: No.1, 2 and 3. Pozidriv: No.1, 2 and 3.
450g(1lb) ball pein hammer wood shaft.
7.5m/25ft steel tape.
Snap-off 8 segment blade economy knife.
Retractable trimming knife with 5 blades.
Junior hacksaw frame.
300mm lightweight professional hacksaw frame.
6 off 12" x 1/2" x 18t HSS hacksaw blades.
20 junior hacksaw blades.
2 plastic handle household scissors.
150mm snipe nose plier with side cutter.
150mm diagonal cutting nipper.
150mm engineers' combination pliers with side cutter.
250mm curved jaw high strength grip wrench.
8 piece Pro-Torq screwdriver set: Crosspoint No.1 x 75, No.2 x 100, Pozidriv No.2 x 100, Flared 6.3 stubby, 6.3 x 100, 8.0 x 200, Parallel 5.0 x 75, 5.0 x 150.
14 piece combination spanner set 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
25 piece metric socket set 1/2" square drive sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars.
9 piece metric hex key set 1.5-10mm.

300 Piece Engineers Professional Tool Kit - EPT300

Supplied in a 5 drawer professional roller cabinet and a 3 drawer top chest. Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes. Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. 3 drawer top chest. Top compartment size: 89 x 661 x 150mm. Drawer sizes: 1 51 x 591 x 282.5mm, 2 102 x 591 x 282.5mm, 5 drawer roller cabinet, internal drawer dimensions: Drawers: 4 591 x 460 x 102mm. Drawers: 1 591 x 410 x 204mm.
Set of 25 HSS drills 1-13.00mm X 0.5mm 8 piece 200mm (8`) double cut engineers file set 16cm (6.1/2`) cut 2 assorted needle file 20 x 150mm (6") junior hacksaw blades 10 x 12`x1/2`X18tpi HSS all hard hacksaw blade 25 x 230mm x 280mm assorted emery sheets 200mm (8`) soft grip phosphate djustable wrench 6 x 150mm flat cold chisels 3` 18-bld. Met/imp comb feeler gauge set 4`x3/16`(4.8mm) square head centre punch Set of 6 parallel pin punches 150mm/6" imp/metric rigid rustless rule 300mm/12` rigid rustless rule - round end 150mm (6") engineers square 300mm (12") engineers square 7" double ended engineers scriber 1.1/4" focal length eye loupe Adjustable telescopic 1 1/4` mirror Set of 2 - 1/16-1/4` & 1/4-3/4` tap wrenches 1lb ball pein hammer - wood shaft 16oz black rubber mallet - wood shaft 5.1/2` Plastic handle household scissors 8.1/2` Plastic handle household scissors 5m/16" professional ABS steel tape Snap-off 8 seg-blade heavy duty economy knife Retractable trimming knife c/w 5 blades Beaver style junior hacksaw Professional "plus" cushion grip hacksaw Magnetic pick-up tool Set of 4 Pro-Torq pliers 10" curved jaw grip wrench 12 piece Pro-Torq screwdriver set 64 Piece 1/4` hexagon bit set 1/4` hex bit driver 7 Piece box spanner set 6-19mm c/w tommy bars 10 piece combination spanner set 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm. 50 Piece metric 3/8` square drive socket set 8` Straight blade tinsnip 3 Drawer professional tool chest 5 Drawer professional roller cabinet 8 Piece Metric Pro-Torq hex wrench set on clip 9 Piece imperial Pro-torq hex wrench set on clip kraft boxs 610 X 420 X 150mm 19mm x 33m black PVC insulation tape

18 Piece Decorator's Painting Kit

Contents:
2 x 25mm industrial paint brush. 13, 50, 75, 100mm industrial paint brushes. 240mm economy paint tray - plastic. 230mm wide birdcage (jumbo) paint roller. 230mm long pile polyester roller refill. 230mm medium pile polyester roller refill. 230mm wide foam paint roller refill. Long pile radiator roller complete. Long pile radiator roller refill. Metal telescopic handle. General purpose masking tape 19mm x 50m & 50mm x 50m.
460mm canvas tool bag.
Dust sheet.

Electricians VDE Tool Bag Tool Kit - 16 Piece

Heavy duty tear resistant tool bag with reinforced stitched edge velcro fastening flap with soft touch carry handle and double webbed shoulder strap fixed with metal release clasps. 2 removable tool boards (1 velcro fasten) are kept inside which have a unique tool storage securing system built in.

All Pro-Torq tools have a dual material grip handle that is designed to allow the user to apply the greatest force with the minimum amount of effort, these are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.


All tools are VDE approved.