Heavy-Duty Hydraulic Hacksaw

KP200
Complete hydraulic system. Infinitely variable saw feed pressure control. Complete electric components with motor protection. Recalculating coolant system. Adjustable material length stop. Clamping device for short ends. Equalising bar for jaws. Nesting fixture for multiple sawing of stacked bars, small rounds and tubing. Material support stand. One saw blade ready for cutting. One set of necessary tools and tool box. One grease gun. Instruction manual and parts list.

Specifications:
90 max.: 200mm.
Capacity: 190 x 200mm.
45 max.: 90mm.
Capacity: 190 x 90mm.
Stroke length: 120mm.
Strokes: 110, 140/min.
Blade size: 350 x 32mm.
Main motor: 4P, 1HP.
Size (L x W x H): 120 x 51 x 79cms.
Weight: 270kg.

Vari Turret Milling Machine

ETM-2VS R8 Variable Speed 1-199-200
3 AXIS DRO. Power feed to three axis. Versatile machine for drilling - milling and boring operations. Heavy-duty and sturdy machine is made of meehanite casting of generous proportion. Rigid machine is rated for continuous use and will give you longer life expectancy. Accurate engineering tolerances have been met by highly skilled engineers during manufacture. 3HP motor allows you to take large cuts during your production runs. R8 spindle allows you to use a large selection of standard tooling. Automatic stop is to up/down feed at the end of the pre-set travel. Angular positioning to left/right through worm and gear for ease. Reversible switch allows you to run spindle clock and counter clock wise. Centralised one-shot lubrication ensures lubrication to all parts otherwise inaccessible. Metric dials with DRO allow you to work in either Inch or Metric calibrations. Hardened slide ways gives the machine much longer production life. Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable longitudinal cross and vertical feed and rapid. Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards.

Standard accessories:
Power feed to quill - three rates. Servo type longitudinal, cross and vertical feed and rapid.
One shot lubrication.
Coolant system.
Electrically interlocked spindle guard.
Low volt machine light.

Specifications:
Table size: 228 x 1245mm.
Table travel (long): 838mm.
Saddle travel (cross): 300mm.
Knee travel (vertical): 400mm.
Quill travel: 127mm.
Ram travel: 315mm.
Spindle motor: 2.2KW (3HP).
Spindle taper: R8.
Quill power feed: 0.04, 0.08, 0.15mm/rev.
Spindle speeds: 70 - 4200 variable speed.
Overall length: 1700mm.
Overall width: 1600mm.
Overall height: 2130mm.
Spindle to table: min. 0mm, max. 415mm.
Spindle to column: min 170mm, max 485mm.
Weight: 100kg.

Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF20 Vario
Extremely stable drilling-milling machine for a precise, fast and secure fabrication. Infinite drive with electronic regulation and digital sleeve travel indicator included. Digital Quill travel indicator, precision of reading 0.01mm, mm/inch conversion.



Features:
Sturdy and precision dovetail slide way with adjustable tapered gibs. Infinitely variable drive with electronic regulation. Dynamic regulation of revolutions from 100 to 3,000rpm. Easy and clear operation thanks to individually adjustable control panel. Automatic off-switch for easy operation, with under voltage circuit breaker, right-left hand rotation. Cam controlled. Infinitely variable speed adjustment. Digital sleeve travel indicator, precision of reading 0.01mm. Positive clamping of the spindle sleeve in the drill head. Integrated work table, table illumination. High concentricity precision 0.01mm measured in the spindle sleeve. Expanding bellows as guide protection. Two stage gear transmission making excessive motor power unnecessary. D.C. motor with permanent speed monitoring. The drill head can be swivelled plus/minus 90 thus permitting milling and drilling operations in any angular position. Fine crossfeed of spindle sleeve when milling. Spindle sleeve feed via stargrip (drilling). Upright can be displaced laterally to enable longer travels and centred machining of the work piece on the cross table even when the head has been swivelled. Adjustable end stops. Feed spindles can be adjusted without clearance thanks to adjustable spindle nuts.

Specifications:
Drilling capacity (max): 16mm.
Milling cap. of inserted tooth cutter (max): 63mm.
Milling cap. of end mill cutter (max): 20mm.
Throat depth: 185mm.
Spindle holding fixture: 2MT/M10.
Spindle speeds: 100-3000rpm.
Spindle travel: 50mm.
T slot size: 12mm.
Table size: 500x180mm.
Z Travel: 280mm.
Y Travel: 175mm.
X Travel: 280mm.
Motor: 50Hz 850W.
Dimensions (LxWxH): 670x550x860mm.
Net weight: 103kgs.

Standard Accessories
Drawbar M10.
Work table illumination.
Digital sleeve travel indicator.

Model D330x1000, 0340-1007 3ph, 0340-1006 1ph

Rigid heavily ribbed, hardened and precision ground cast iron bed with V guideways. Camlock spindle nose D1-4. Hardened oil running headstock spindle with high precision, realignable tapered bearings. Guaranteed spindle nose runout less than 0.015mm. Closed quick action feed and screw cutting gears running in oil bath. Simultaneous engagement of lead screw & power feed levers is prevented by interlocking. Adjustable slip clutch of lead screw. Forward/reverse spindle switch. Safety switch with no-volt release, emergency stop and motor protection. Foot brake. Gap bed. Manufactured to DIN 8606 (Toolmakers Precision).

Specifications:
Centre height: 165mm.
Max swing over bed: 330mm.
Max swing over saddle: 198mm.
Max swing in gap: 476mm.
Length of gap: 115mm.
Distance between centres: 1000mm.
Width of bed: 187mm.
Spindle bore: 38mm.
Spindle nose: D1-4.
Spindle taper: MT 5.
Tailstock taper: MT 3.
No of spindle speeds: 8.
Range of spindle speeds: 70?2000rpm.
Leadscrew dia/pitch: 22mm, 3mm.
Cross feed: 0.033 ? 0.933mm/rev.
Longitudinal feed: 0.097 ? 2.713mm/rev.
Metric threads: 0.4 ? 7mm.
Imperial threads: 4 ? 56tpi.
Diametral threads: 8 ? 120dp.
Module threads: 0.2 ? 3.5mp.
Top slide travel: 85mm.
Cross slide travel: 170mm.
Motor power: 1.5kW.
Tool section: 16mm.
Size (LxWxH): 193 x 75 x 151cm.
Net weight: 600kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV50 20? Throat 1-631-200

Cutting blade to column: 520mm.
Capacity max. work height: 310mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3880mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 500kgs.

Model D420 x 1000 420mm Swing x 1000mmDBC 3ph 0340-1160

Induction hardened and precision ground heavily ribbed prismatic bed. Substructure and lathe bed made from a single block of Meehanite cast iron. Camlock spindle nose D1-6. Oil-quenched hardened work spindle bedded in two readjustable precision taper roller bearings. Guaranteed concentricity precision of the spindle nose 0.015mm. Smooth running work spindle gearwheels hardened and precision ground. Leadscrew and feed shaft drive easily switchable via oil quenched feed gear. Adjustable safety coupling of the feed shaft. The tailstock may be shifted plus/minus for taper turning. Right - left - hand rotation can be switched with the help of the indexing spindle. Emergency stop mushroom switch, lockable main switch. Removable gap bed. Adjustable dial of the threading gauge. Mechanical foot spindle brake. Manufactured to DIN 8606 (toolmakers precision).

Standard accessories:
200mm 3 jaw chuck, 250mm 4 jaw chuck, 350mm face plate, steady rest, follow rest, coolant system, rear splash guard, spindle brake, 2-step drive motor, electrically interlocked chuck guard, turret limit stop with fine adjustment acting as end stop on lathe saddle, machine lamp, threading gauge, operating tools.

Specifications:
Between centres: 1000mm.
Centre height: 210mm.
Max.turning diameter: 420mm.
Max turning diameter over saddle: 255mm.
Max turning diameter over gap: 590mm.
Bed width: 250mm.
Spindle hole: 52mm.
Spindle taper: 6MT.
Tailstock taper: 4MT.
Spindle: D1-6.
No of spindle speeds: 16.
Spindle speeds: 45-1800rpm.
Longitudinal feeds: 0.05-1.7mm/rev.
Cross feeds: 0.025-0.85mm/rev.
Pitch metric (39): 0.2-14mm.
Pitch inch (45): 2-72tpi.
Modular thread (18): 0.3-3.5mp.
Trapezoid thread (21): 8-44dp.
Top slide travel: 140mm.
Cross slide travel: 230mm.
Sleeve travel: 120mm.
Max. Tool shank: 20mm.
Main motor power: 4.5kW.
Coolant pump: 0.1kW.
Size (LxWxH): 195x91x135cms.
Weight: 1570kgs.

Geared Head Pedestal Drill

Quantum B28 GS
Drilling spindle with precision ball/taper roller bearings. Convincing arguments: quality, efficiency and price. Spindle assembly with guaranteed concentricity precision less than 0.02mm measured in the drilling spindle sleeve. Easy to operate automatic off switch (IP 54 compliant), with low voltage release, emergency stop switch, fwd/rev spindle rotation. With gear drive for direct force fit drive. Speed selection via two control levers on the sides of the drill head. Adjustment of the drill head height via toothed rack. Powerful, smooth running 2 speed electric motor directly flanged onto the gear head. Largely dimensioned, solid drilling table, precisely machined with diagonally running T-slots, heavily ribbed at the back. Worktable height can be adjusted via a toothed rack.

Standard Accessories:
Quick Action drill chuck.
Arbor to suit.

Specifications:
Model: B28 GS.
Stock Number: 0333-4283.
Drilling cap. steel max: 30mm.
Drilling cap. cast iron max: 38mm.
Threading steel max: M12.
Threading cast iron max: M16.
Working range: 315mm.
Sleeve travel: 140mm.
Spindle taper: 3MT.
Distance spindle-table max: 660mm.
Distance spindle-base max: 1075mm.
Working surface table: 310 x 360mm.
Working surface base: 305 x 297mm.
T-slot size: 14mm.
Spindle speeds: 100 - 2900rpm.
Number of steps: 8.
Motor power 2 speeds: 750W.
Column diameter: 100mm.
Size (LxWxH): 55 x 47 x 170cms.
Weight: 270kg.

Model D420 x 1500 420mm Swing x 1500mmDBC 3ph 0340-1165

Induction hardened and precision ground heavily ribbed prismatic bed. Substructure and lathe bed made from a single block of Meehanite cast iron. Camlock spindle nose D1-6. Oil-quenched hardened work spindle bedded in two readjustable precision taper roller bearings. Guaranteed concentricity precision of the spindle nose 0.015mm. Smooth running work spindle gearwheels hardened and precision ground. Leadscrew and feed shaft drive easily switchable via oil quenched feed gear. Adjustable safety coupling of the feed shaft. The tailstock may be shifted plus/minus for taper turning. Right - left - hand rotation can be switched with the help of the indexing spindle. Emergency stop mushroom switch, lockable main switch. Removable gap bed. Adjustable dial of the threading gauge. Mechanical foot spindle brake. Manufactured to DIN 8606 (toolmakers precision).

Standard accessories:
200mm 3 jaw chuck, 250mm 4 jaw chuck, 350mm face plate, steady rest, follow rest, coolant system, rear splash guard, spindle brake, 2-step drive motor, electrically interlocked chuck guard, turret limit stop with fine adjustment acting as end stop on lathe saddle, machine lamp, threading gauge, operating tools.

Specifications:
Between centres: 1500mm.
Centre height: 210mm.
Max.turning diameter: 420mm.
Max turning diameter over saddle: 255mm.
Max turning diameter over gap: 590mm.
Bed width: 250mm.
Spindle hole: 52mm.
Spindle taper: 6MT.
Tailstock taper: 4MT.
Spindle: D1-6.
No of spindle speeds: 16.
Spindle speeds: 45-1800rpm.
Longitudinal feeds: 0.05-1.7mm/rev.
Cross feeds: 0.025-0.85mm/rev.
Pitch metric (39): 0.2-14mm.
Pitch inch (45): 2-72 TPI
Modular thread (18): 0.3-3.5 MP
Trapezoid thread (21): 8-44 DP.
Top slide travel: 140mm.
Cross slide travel: 230mm.
Sleeve travel: 120mm.
Max. Tool shank: 20mm.
Main motor power: 4.5kW.
Coolant pump: 0.1kW.
Size (LxWxH): 245x91x135cms.
Weight: 1950kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV40 16? Throat 1-631-100

Cutting blade to column: 410mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3350mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW
Weight: 440kgs

Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF30
Precision drilling-milling machine with infinitely variable electronic speed control and digital spindle sleeve travel display. Convincing arguments: quality, efficiency and price. Solid dovetail slideway, hand-scraped, provides for highest stability and optimum precision. Solid, precise, largely dimensioned and precisely machined surface. Heavy solid casting. Adjustable V-ledges. Very wide speed range. Infinitely variable drive. High concentricity precision due to taper roller bearings, less than 0.015 mm measured in the spindle sleeve. Gearhead plus/minus 30 rotatable. Digital spindle sleeve travel display, accuracy of the display 0.01 mm, reversible mm/inch. Drill depth stop. Special steel covering of Z-Axes. Digital speed display. Threading mode. Automatic mode.

Specifications:
Motor power: 1.5kW/230V 50Hz.
Drilling capacity in casting (max.): 35mm.
Drilling capacity in steel (max.) 30mm.
Milling capacity cutter head (max.) 75mm.
Milling capacity end mill cutter (max.): 30mm.
Working range: 220mm.
Spindle holding fixture: MK3.
Sleeve travel: 90mm.
Sleeve travel diameter: 70mm.
Draw-in rod: M12.
Head rotation: plus/minus 300.
Gear stages: 3 stages.
Z-axis travel: 470mm.
Gear stage slow: 80 - 1.100rpm.
Gear stage average: 160 - 1.700rpm.
Gear stage fast: 320 - 3.100rpm.
Cross table length x width: 750 x 210mm.
X-axis travel: 430mm.
Y-axis travel: 200mm.
Distance spindle/cross table: 470mm.
T-slot size/distance: 12mm/63mm/number 3.
Length x Width x Height: 1076 x 733 x 1108mm.
Net weight: 265kg.