Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Stop End Blanks

For use on plain pipe. When finishing off open pipes.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Straight Tap Connectors

Connects a threaded pipe to a plain pipe, end to end.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Equal Tees

All ends for Copper. Connects plain pipe end to end and at 90.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Reducing Set

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Elbow Connectors

Copper x Copper. Connects plain pipe at 90.