Series S7522

These new models have been released in technopolymer, maintaining the same technical characteristics as the existing Camozzi fittings range. Lightweight, adaptable and they allow for easy maintenance of the collet and the internal seal. All materials, except for the internal seal, can easily be recycled.

General Data
Tube external diameters: 4 - 6 - 8 - 10 - 12 - 16 mm
Connections: G1/8, G1/4, G3/8, G1/2, G3/4, M5, M7
Material body: technopolymer; insert: brass, collet: nickel-plated brass; seals: NBR
Threads GAS cylindrical ISO-228 (BSP)
Operating pressure min. - 0,9 bar, max. 16 bar
Tube to connect Rilsan, polyamide 6 - 11 - 12, polyethylene, PU
Diameters: 4 - 6 - 8 - 10 - 12 - 16 mm
Fluid compressed air (for other types of fluid, contact our engineers)
Temperature -20 ?C (see data for tubing used)



Male Swivel Elbow

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

Camozzi Tube To Tube Elbows

7550
Super-rapid compact fitting Technopolymer equal tube elbow.
Available in 4, 6, 8, 10mm tubes.

Camozzi Female Run Tees

2050
Series 2000 pipe fittings BSPT adaptor male/female run Tee.
Available in threads:
G1/8 overall length 37mm.
G1/4 overall length 46mm.
G3/8 overall length 48.5mm.
G1/2 overall length 60.5mm.

Camozzi Male/Female Reducer - Parallel

2531
Series 2000 pipe fittings BSP adaptor reducing bush.
Male G1/4 - Female G1/8 thread.

Series 2010

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Male - Male Elbows

Series 2003

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Equal Female Tees

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Series 6000 Series Pneumatic Fitting Kits

These kits are available for a range of tube diameters and contain the most commonly used Series 6000 Super Rapid brass push in fittings.
Each kit contents:
3x 6540 Series equal tube tee
3x 6580 Series tube to tube
connector
3x 6550 Series equal tube elbow
5x S6520 Series swivel elbow
10x S6510 Series male stud

Small Tube Cutters

Capacity: 12mm