Series S7522

These new models have been released in technopolymer, maintaining the same technical characteristics as the existing Camozzi fittings range. Lightweight, adaptable and they allow for easy maintenance of the collet and the internal seal. All materials, except for the internal seal, can easily be recycled.

General Data
Tube external diameters: 4 - 6 - 8 - 10 - 12 - 16 mm
Connections: G1/8, G1/4, G3/8, G1/2, G3/4, M5, M7
Material body: technopolymer; insert: brass, collet: nickel-plated brass; seals: NBR
Threads GAS cylindrical ISO-228 (BSP)
Operating pressure min. - 0,9 bar, max. 16 bar
Tube to connect Rilsan, polyamide 6 - 11 - 12, polyethylene, PU
Diameters: 4 - 6 - 8 - 10 - 12 - 16 mm
Fluid compressed air (for other types of fluid, contact our engineers)
Temperature -20 ?C (see data for tubing used)



Male Swivel Elbow

Series 2003

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Equal Female Tees

Camozzi Swivel Branch Tees

S6430
Super-rapid fittings for plastic tubes. Push-in fitting swivel branch Tee.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.

Series S6950

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools.
The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General Data:
Material body and collet: brass OT nickel-plated O-Ring NBR,
seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid,
contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Straight Stem Coupling

Camozzi Male/Female Reducer - Parallel

2531
Series 2000 pipe fittings BSP adaptor reducing bush.
Male G1/4 - Female G1/8 thread.

Camozzi Male Stud Tees

2080
Series 2000 pipe fittings BSPT adaptor male stud tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1541 Swivel Elbow Sprint

Camozzi Female Run Tees

2050
Series 2000 pipe fittings BSPT adaptor male/female run Tee.
Available in threads:
G1/8 overall length 37mm.
G1/4 overall length 46mm.
G3/8 overall length 48.5mm.
G1/2 overall length 60.5mm.

Camozzi Swivel Branch Tees

7432
Super-rapid compact fitting Technopolymer swivel branch Tee with O-ring assembled.
Available in:
4mm tube, G1/8 thread.
4mm tube, M5 thread.
6mm tube, G1/8 thread.
6mm tube, G1/4 thread.
6mm tube, M5 thread.
8mm tube, G1/8 thread.
8mm tube, G1/4 thread.
8mm tube, G3/8 thread.
10mm tube, G1/4 thread.
10mm tube, G3/8 thread.
12mm tube, G1/4” thread.
12mm tube, G3/8” thread.
12mm tube, G1/2” thread.
16mm tube, G1/2” thread.
16mm tube, G3/4” thread.

Camozzi Male Stud Couplings

S6510
Super-rapid fittings for plastic tubes. Push-in fitting-male stud.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
10mm tube - G1/2 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.