Series S6440

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Swivel Run Tees

Camozzi Bulkhead Couplings

6590
Super-rapid fittings for plastic tubes. Push-in fitting bulkhead coupling.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Camozzi Male Stud Couplings

S6510
Super-rapid fittings for plastic tubes. Push-in fitting-male stud.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
10mm tube - G1/2 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.

Camozzi Multi Swivel Tee

7542
Super-rapid compact fitting Technopolymer multi Tee with O-ring assembled.
Available in:
6mm, 3x4mm tube, G1/8 thread.
6mm, 3x4mm tube, G1/4 thread.
8mm, 3x6mm tube, G1/8 thread.
8mm, 3x6mm tube, G1/4 thread.
10mm, 3x8mm tube, G1/4 thread.
10mm, 3x8mm tube, G3/8 thread.

Series 6000 Series Pneumatic Fitting Kits

These kits are available for a range of tube diameters and contain the most commonly used Series 6000 Super Rapid brass push in fittings.
Each kit contents:
3x 6540 Series equal tube tee
3x 6580 Series tube to tube
connector
3x 6550 Series equal tube elbow
5x S6520 Series swivel elbow
10x S6510 Series male stud

Camozzi Swivel Branch Tees

7432
Super-rapid compact fitting Technopolymer swivel branch Tee with O-ring assembled.
Available in:
4mm tube, G1/8 thread.
4mm tube, M5 thread.
6mm tube, G1/8 thread.
6mm tube, G1/4 thread.
6mm tube, M5 thread.
8mm tube, G1/8 thread.
8mm tube, G1/4 thread.
8mm tube, G3/8 thread.
10mm tube, G1/4 thread.
10mm tube, G3/8 thread.
12mm tube, G1/4” thread.
12mm tube, G3/8” thread.
12mm tube, G1/2” thread.
16mm tube, G1/2” thread.
16mm tube, G3/4” thread.

Camozzi Bulkhead Couplings

6590
Super-rapid fittings for plastic tubes. Push-in fitting bulkhead coupling.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.

Camozzi Female Equal Cross Couplings

2033
Series 2000 pipe fittings BSP adaptor female equal cross.
Available in threads G1/8, 1/4 and 3/8.

Series 2520

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Male - Female Reducers