产品 / 手动工具 / 敲击扳手
| 品牌 |
|
编号：KEN5807010K
●产品描述：
Ring Slogging Wrenches
Manufactured to DIN 7444.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5804700K
●产品描述：
Open Jaw Spanners
Made from forged and hardened steel. Conform to DIN 895.
Double Ended
编号：KEN5801950K
●产品描述：
Open Jaw Spanners
Made from forged and hardened steel. Conform to DIN 894.
Single Ended
编号：KEN5801190K
●产品描述：
Open Jaw Spanners
Made from forged and hardened steel. Conform to DIN 894.
Single Ended
编号：KEN5806680K
●产品描述：
Open Jaw Slogging Wrenches
Manufactured to DIN 133.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5808550K
●产品描述：
Podger Open Ended Spanners
Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.
编号：SNA5800534E
●产品描述：
Cranked Open Jaw Podger Spanners
Cranked handle assists with location of spanner on to fixings within a recess. Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.
编号：KEN5807120K
●产品描述：
Ring Slogging Wrenches
Manufactured to DIN 7444.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5806140K
●产品描述：
Open Jaw Slogging Wrenches
Manufactured to DIN 133.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
编号：KEN5807240K
●产品描述：
Ring Slogging Wrenches
Manufactured to DIN 7444.
Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.