产品 / 手动工具 / 敲击扳手
品牌
36mm OPEN JAW SLOGGING WRENCH

36mm OPEN JAW SLOGGING WRENCH

编号:KEN5806050K
●产品描述:
Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
32mm O/E PODGER SPANNER

32mm O/E PODGER SPANNER

编号:KEN5808560K
●产品描述:
Podger Open Ended Spanners

Open jaw spanners are designed to engage the nut from the side and as it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Podger wrenches have a tapered handle for assisting with alignment of fixing holes on jigs and fabrications.



41mmx46mm WORKSHOP OPEN END SPANNER

41mmx46mm WORKSHOP OPEN END SPANNER

编号:KEN5804300K
●产品描述:
Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

17mmx21mm WORKSHOP OPEN END SPANNER

17mmx21mm WORKSHOP OPEN END SPANNER

编号:KEN5803620K
●产品描述:
Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

55mmx60mm WORKSHOP OPEN END SPANNER

55mmx60mm WORKSHOP OPEN END SPANNER

编号:KEN5804500K
●产品描述:
Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

60mm OPEN JAW SLOGGING WRENCH

60mm OPEN JAW SLOGGING WRENCH

编号:KEN5806100K
●产品描述:
Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
65mmx70mm WORKSHOP OPEN END SPANNER

65mmx70mm WORKSHOP OPEN END SPANNER

编号:KEN5804600K
●产品描述:
Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

32mm RING SLOGGING WRENCH

32mm RING SLOGGING WRENCH

编号:KEN5807040K
●产品描述:
Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
105mm OPEN JAW SLOGGING WRENCH

105mm OPEN JAW SLOGGING WRENCH

编号:KEN5806190K
●产品描述:
Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.
10mmx13mm WORKSHOP OPEN END SPANNER

10mmx13mm WORKSHOP OPEN END SPANNER

编号:KEN5803240K
●产品描述:
Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended