Level Developments Precision Screw-on Levels

For permanent fixing to machines and other units to level and check horizontal surfaces. Durable construction. Hardened base. Vial is protected from damage by a tough plastic screen.
Available in 2 models, with sensitivities of 0.4mm/M (0.004/10") or 0.05mm/M (0.0005/10"). Length: 120mm.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

75mm (3") Engineers' Steel Square

Machinist's Level

Cast iron base, precision ground and finished reference surfaces, unmachined surfaces are epoxy coated. With ground and graduated main vials housed in a chrome finished brass tube with a friction fit closing cover to prevent breakage with cross test vial to prevent inaccuracies in the main vial caused by canting the level sideways on convex work. Base is grooved for use on convex surfaces.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

225mm (9") Engineer's Steel Square

Kennedy® Toolmakers' Adjustable Steel Squares

Made from hardened steel and precision ground. Supplied with three fully adjustable blades which can be set and fixed into position using a locking nut on the stock. One plain, parallel blade for use as a conventional engineers square, 30 and 45 bevel edged blade for checking angles, and a narrow blade graduated metric and imperial.

Kennedy® Digital Protractor

This digital protractor has a range of 360° split into 4 x 90° quadrants. It is simple to calibrate and the intelligent display changes orientation at 90° and 270° to remain readable. It has a 'V' groove on the top and bottom for easy placement on acute angled or cylindrical objects. 3V lithium battery gives up to 2000 hours use. Complete with a leatherette pouch that has a belt loop.

Moore & Wright Replacement Vial

ELS 06 Vials (ELS/ELM). Length: 85mm. Weight: 20g.

Level Developments Circular Spirit Levels

For permanent fixing to level critical machines etc. Sensitivity of 20-30 minutes per 2mm of bubble movement.
Two models available:
CG-30: 30mm diameter. Height 11mm. Weight 20g.
CG-60: 60mm diameter. Height 17mm. Weight 143g.

Cross Test Level

The two vials are at right angles to one another for cross test levelling without moving the level from the workpiece. Cast iron body with precision ground reference surface and hard wearing epoxy coating.

Moore & Wright Engineers' Mini Level

Ultra compact dimensions and a single vial. Machined from a solid block of carbon steel.