Machinist's Level

Cast iron base, precision ground and finished reference surfaces, unmachined surfaces are epoxy coated. With ground and graduated main vials housed in a chrome finished brass tube with a friction fit closing cover to prevent breakage with cross test vial to prevent inaccuracies in the main vial caused by canting the level sideways on convex work. Base is grooved for use on convex surfaces.

Kennedy® Toolmakers' Adjustable Steel Squares

Made from hardened steel and precision ground. Supplied with three fully adjustable blades which can be set and fixed into position using a locking nut on the stock. One plain, parallel blade for use as a conventional engineers square, 30 and 45 bevel edged blade for checking angles, and a narrow blade graduated metric and imperial.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

100mm (4") Engineer's Steel Square

Level Developments Precision Screw-on Levels

For permanent fixing to machines and other units to level and check horizontal surfaces. Durable construction. Hardened base. Vial is protected from damage by a tough plastic screen.
Available in 2 models, with sensitivities of 0.4mm/M (0.004/10") or 0.05mm/M (0.0005/10"). Length: 120mm.

Pocket Level

Single vial in nickel-plated hexagonal body.

Cross Test Level

The two vials are at right angles to one another for cross test levelling without moving the level from the workpiece. Cast iron body with precision ground reference surface and hard wearing epoxy coating.

Moore & Wright Engineers' Mini Level

Ultra compact dimensions and a single vial. Machined from a solid block of carbon steel.

Level Developments Square Frame Level

Two opposing flat bearing surfaces and two opposing vee surfaces ground to within 0.002mm. Manufactured from stabilised cast iron. Sensitivity: 0.02mm/m (0.0002/10"). Size: 200mm x 200mm (8" x 8").

Level Developments Precision Screw-on Levels

For permanent fixing to machines and other units to level and check horizontal surfaces. Durable construction. Hardened base. Vial is protected from damage by a tough plastic screen.
Available in 2 models, with sensitivities of 0.4mm/M (0.004/10") or 0.05mm/M (0.0005/10"). Length: 120mm.

Mitutoyo Engineers' 200mm Levels

Incorporates zero-point adjusting feature and sub-level tube indicating error or main level tube to within 0.2 graduation. V-slot on base. Indicating error to one graduation. 2 models available with sensitivities ranging of 0.1mm/1m 0.02mm/1m.

Series 960