'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

Pocket Type - 32mm Diameter Face

9.5mm body for narrow lands between shoulders or in a bore. With jewelled bearings and precision miniature pivot bearings for almost friction-free movement of the contact point. Contact point is reversible by lever allowing measurement of the top or bottom surface of any workpiece. Bezel and dial face are fully adjustable.

Series 513

57.4mm Diameter Face

Conventional size, easy to read indicator for most general applications.



Graduation: 0.01mm
Travel: 5mm
Reading: 0-100

Easy Read Dial Gauges Plunger Type

Matt finish chromed housings and black oxidised limit hands. Shockproof mechanism. Fitted with 1/4" inside diameter stem. Manufactured to BS 907.



58mm (2 1/4") Dial Diameter

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Jewelled Type

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

Kennedy® Spares

To suit Kennedy® Dial Test Indicators.

76.5mm (3") Diameter Face

Limit hands, large size with back lug on centre.

Series 3

Rev. Counter with Spindle Cap

Kennedy® Easy Read Dial Gauges Plunger Type

Easy Read Dial Gauges & DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, "Easy Read" faces for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands. Fitted with 1/4" inside diameter off-set back lug and 5/16" diameter stem. Manufactured to BS 907.



58mm (2.1/4") Dial Diameter

Testatest

28mm/0.01mm/0-0.4-0 scale. Rotating dial. Bi-directional measuring with automatic reversal. Patented shock absorber system. Insensitive to magnetic fields. Full metal construction giving exceptional robustness. Monobloc housing with 3 dovetail attachments. Jewelled movement with 7 rubies.