57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

Dial Indicators - 41mm Diameter Face

Water Resistent Type. Model 1900F-60 has limit hands, stroke 2mm and a white/red dial. Model 1929F-60 has limit hands, stroke 3.5mm and a yellow/red dial.

Series 1

Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Sets

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

Lever Type Dial Test Indicators - Imperial

The Baty HL series of lever type dial test indicators are top quality, Swiss-made precision instruments.
Low inertia jewelled movements and rugged construction make them suitable for universal applications in the workshop and inspection.

HL Series

High sensitivity, repeatability and accuracy
Meet or exceed BS, DIN, Federal and other national standards
Anti-magnetic
Automatic reverse action stylus - hand always rotates clockwise
Adjustable bezel and hand for zeroing
Rugged, satin chrome finished body
3 dovetail mountings, top, back and front
Fully jewelled and geared movement
Precision ball bearing mounted, interchangeable carbide point swivels through 240
Baty HL indicators are supplied with: 2mm diameter contact point - fitted, 1mm and 3mm diameter interchangeable contact points, contact point key, Dovetail stems 911 and 914 and tough plastic case.

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

57.4mm Diameter Face

Jewelled Type, with Limit Hands and Rev. Counter

Series 2