57.4mm Diameter Face

Conventional size, easy to read indicator for general applications.

Series 2

Kennedy® Easy Read Dial Gauges Plunger Type

Easy Read Dial Gauges & DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, "Easy Read" faces for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands. Fitted with 1/4" inside diameter off-set back lug and 5/16" diameter stem. Manufactured to BS 907.



58mm Dial Diameter.

Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

Easy Read Dial Gauges Plunger Type

Matt finish chromed housings and black oxidised limit hands. Shockproof mechanism. Fitted with 1/4" inside diameter stem. Manufactured to BS 907.



58mm (2 1/4") Dial Diameter

Kennedy® Dial Gauges

Kennedy® plunger and lever type dial test indicators (DTI) provide accurate and precise repeatability of measurements or manufacturing tolerances. All have clearly graduation dial faces with black oxidised indicator.

'Smile-Dial' 58mm (2,1/4") Plunger Type Dial Gauge

The Kennedy® 'Smile-Dial' plunger type dial gauge has an easy to read 58mm (2,1/4") diameter dial with a matt finish chromed housing and black oxidised limit hands. The mechanism is jewelled to ensure a smooth precise action. Fitted to the back of the 'Smile-Dial' is an off-set lug with 1/4" inside diameter and a 5/16" diameter stem fixing. Manufactured to BS 907.

Graduation: 0.1mm.
Travel: 10mm.
Reading: 0-100.

Dial Indicators - 41mm Diameter Face

Jewelled Type with Limit hands and Rev. Counter

Series 1

Large Diameter Type - 36.2mm Diameter Face

Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Series 513

Standard Type - Clock Only

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

Kennedy® Spares

To suit Kennedy® Dial Test Indicators.