产品 / 轴承 & 滚轴
编号：SNQ6712001R
●产品描述：
SNR Deep Groove Ball Bearings
Open type 25mm bore bearing for the free circulation of either oil or grease.
Size: 25 x 47 x 14mm.
编号：NTN6712190F
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：SNR6714505J
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. These are cylindrical type but are also available with seals & taper bore for use with adaptor sleeves.
Taper Bore
编号：LBT6903302C
●产品描述：
Link-Belt Connecting Links
Other sizes from 5/16" up to 2" pitch are also available from stock. Please ask for details
Simplex Roller Chain American Standard
Simplex Chain
编号：SNR6714220A
●产品描述：
Angular Contact Bearings - Double Row
Double-row angular-contact ball bearings accept axial loads in both directions and can be used singly, as dual bearing units.? withstand axial loads in both directions? accept relatively high speeds of rotationThe construction of these bearings limits them to very small misalignment values, in the range of 0.06.
Series 32...A, 33...A
Contact angle 25, no filling slots and can accept axial loads in both directions. These bearings have synthetic material cages.
编号：SNR6852800M
●产品描述：
Cylindrical Roller Bearings
Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.
Non-Locating Type with two Ribs on Inner Ring and Outer Ring is without Ribs
编号：NTN6712190D
●产品描述：
Single Row Deep Groove Ball Bearings - C3 Internal Clearance
C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.
Open Type
Without seals to allow for the free circulation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present.
编号：SNR6714350K
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. These are cylindrical type but are also available with seals & taper bore for use with adaptor sleeves.
Taper Bore
编号：CTT6888057M
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 10/Z (SPZ/10)
编号：NTN6857002M
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.