Endless Round Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate. Made in BS 6668 : Part 2.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 100m

1 Tonne Folding Mobile Crane

Ideal for home workshops or garages. Folding design for easy storage and transportation. Flow control valve for precise lowering and positioning. Overload safety valve. Hydraulic operation providing easy lifting. Heavy duty swivel hook with safety latch. four different jib options. Heavy duty castors.
Model number: FMC001.
Lifting capacity position (a) 1 Tonne/1,000kg.
Lifting capacity position (b) 3/4 Tonne/750kg.
Lifting capacity position (c) 1/2 Tonne/500kg.
Lifting capacity position (d) 1/4 Tonne/250kg.
Maximum lifting height at minimum jib extension 1868mm.
Maximum lifting height at maximum jib extension 2004mm.
Length of jib in position (a) 865mm.
Length of jib in position (b) 955mm.
Length of jib in position (c) 1045mm.
Length of jib in position (d) 1135mm.
Clearance height of legs 130mm.
Length of frame 1480mm.
Overall clearance height 1555mm.
Maximum width of frame 1000mm.
Distance between rear wheel centres 640mm.
Weight 91kg.

Ultralift Magnetic Lifter

'Rare earth' neodymium magnet material provides light weight, high power performance. No power required which means no additional costs. Simply hook to your crane or hoist and you are ready to lift. Safety locking mechanism prevents accidental release of load. One man can attach the load, effortlessly, in seconds. Access is only required to the load's top face allowing more efficient use of your storage and handling areas.

LM0500

Flat Section;
SWL: 500kg, Minimum Thickness: 30mm, Maximum Length: 2000mm.
Round Section;
SWL: 200kg, Maximum Diameter: 400mm, Maximum Length: 2000mm.

Endless Round Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate. Made in BS 6668 : Part 2.

Vertical Hinged Lifting Clamps

Suitable for lifting, turning (180°) and vertical transfer of hot rolled structural steel plates and sections up to a surface
hardness of 300 Brinell/32 Rockwell C. Fitted with a locking device. Lifting clamps are fitted with special hook-up facilities to enable easy fitting of the clamps in the horizontal position.

NEVER Exceed Maximum Capacity.

NEVER Lift UNDER 20% Of The Rated Capacity.

Block Trolleys - Plain

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 ton models available on request.

Endless Round Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate.



Made in BS 6668 : Part 2.

Block Trolleys - Geared

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 & 20 ton models available on request.

Endless Round Webbing Slings

High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate.



Made in BS 6668 : Part 2.