Tube Cutting & Bending Set

Contains flaring press, 45 spreader, 30mm capacity tube cutter, tube springs 14, 18, 16 and 20mm dia. Robust moulded case.

Adjustable Pipe Wrench

A general purpose pipe wrench with milled and hardened teeth which grips the workpiece tighter the more pressure is applied. Pressed steel handle with high carbon steel profiled jaws and knurled thumb-adjusting nut that easily adjusts with one hand.



Overall length: 230m (9")

Senator® Heavy-Duty Wrenches

Heavy duty pattern. Drop forged, single piece body. Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes and nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Sizes range from 8" - 36".

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Drop Scraper Universal Type

Air Drain Test Kit

Used for testing for leaks in pipes of up to 4'' water gauge.
Contents:
4'' 'U' gauge, 9' length of tubing, hand bellows, 'Y' piece, 1/2'' and 1'' test nipple cap.

Stand & Tool Tray

Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Kennedy Drain Rods

The Kennedy double worm screw for Kennedy drain rods pierce blockages such as paper or rags and the obstruction is drawn back to clear the pipe.
Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4?? Double Worm Screw Universal Type

Folding Double Flaring Tool Set

Compact folding design. Robust moulded case. Single 45 flares: 3/16" to 5/8". Double flares: 3/16" to 1/2". Cutter: 1/8" to 11/4". Deburrer: 1/8" to 1 1/8" internal and external.